AbraSilver Intersects 797 g/t AgEq Over 25 Metres; Drill Results Continue to Consistently Encounter High-Grade Silver, Near-Surface at New JAC Zone

2023-02-27 / @thenewswire

(TheNewswire)

Toronto, ON - TheNewswire - February 27, 2023 - AbraSilver Resource Corp. (TSXV:ABRA) (OTC:ABBRF) (“AbraSilver” or the “Company”) is pleased to announce assay results from four additional diamond drill holes from the ongoing Phase III program on the Company’s wholly-owned Diablillos property in Salta Province, Argentina (“Diablillos” or the “Project”).

All four holes were drilled at the new JAC Zone. Key takeaways from the latest drill results include:

DDH 22-083 intersected a broad zone of high-grade silver mineralization in mixed oxides and sulphides, with 25.0 metres at 774 g/t Ag, 0.28 g/t Au and 1.36% Cu starting from a down-hole depth of 159 metres. The interval contained high-grade copper with associated silver mineralization in sulphide bearing feeder structures near the base of the hole.
DDH 22-086 encountered high-grade silver and copper in sulphides containing 9.0 metres at 342 g/t Ag and 1.55% Cu, directlybeneath an oxide zone of 5.0 metres grading 282 g/t Ag
DDH 23-002 intersected high-grade silver mineralization in an oxide/sulphide transition zone, with 17.0 metres at 289 g/t Ag, including bonanza grades of 2,029 g/t Ag and 2.09 g/t Au over 1.0 metre.
DDH 23-083 encountered multiple zones of silver mineralization in oxides, and 5.8 meters at 502 g/t Ag and 0.26% Cu in sulphides starting at 156 metres down-hole.

The latest assay result highlights are summarized in Table 1 below.

Table 1 – Diablillos Drill Result Highlights in JAC Zone

(Intercepts greater than 2,000 gram-metres AgEq shown in bold text):

Drill Hole			From (m)	To (m)	Type	Interval (m)	Ag g/t	Au g/t	Cu %	AgEq1 g/t
DDH-22-083			152.5	155.5	Oxides	3.0	188.9	0.11	-	197.9
DDH-22-083			159.0	184.0	Transition	25.0	773.8	0.28	1.36	796.7
DDH-22-083	Includes		162.5	171.0	Sulphides	8.5	694.7	0.10	3.36	702.9
DDH-22-086			72.0	87.0	Oxides	15.0	56.9	-	-	56.9
DDH-22-086			153.0	158.0	Oxides	5.0	282.2	-	-	282.2
DDH-22-086			158.0	167.0	Sulphides	9.0	342.3	-	1.55	342.3
DDH-23-002			148.0	165.0	Transition	17.0	288.6	0.14	-	300.1
DDH-23-002		Includes	155.0	165.0	Transition	10.0	463.1	0.23	-	481.9
DDH-23-002		Includes	160.0	161.0	Sulphides	1.0	2,029.0	2.09	-	2,200.2
DDH-23-003			87.5	110.0	Oxides	22.5	32.4	-	-	32.4
DDH-23-003			115.0	119.0	Oxides	4.0	84.6	-	-	84.6
DDH-23-003			133.0	141.0	Oxides	8.0	79.3	-	-	79.3
DDH-23-003			155.8	161.5	Sulphides	5.8	502.2	-	0.26	502.2

Note: All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true widths. True widths are estimated to be approximately 80% of the interval widths.

1AgEq based on 81.9(Ag):1(Au) calculated using long-term prices of US$25.00/oz Ag and US$1,750/oz Au, and 73.5% process recovery for Ag, and 86.0% process recovery for Au as demonstrated in the Company’s Preliminary Economic Assessment in respect of Diablillos dated January 13, 2022, using formula: AgEq g/t = Ag g/t + Au g/t x (Gold Price/Silver Price) x (Gold Recovery/Silver Recovery). No value is ascribed to copper grades in the AgEq calculations.

John Miniotis, President and CEO, commented, “We continue to encounter very impressive drill results, in practically every drill hole, in the new JAC zone. We are also very pleased that the Company remains well-funded to complete the recently expanded drill campaign and deliver on its next set of upcoming milestones including: additional drill results from JAC and other targets, drill results from the La Coipita project, an updated Mineral Resource Estimate and a Pre-Feasibility Study at Diablillos before the end of the year. With multiple significant catalysts on the horizon and ongoing exploration drilling, we expect investors will ultimately recognize AbraSilver’s significant value proposition.”

Dave O’Connor, Chief Geologist, commented, “Drilling at JAC continues to encounter high-grade silver mineralization in oxides at shallow depths together with copper sulphide mineralization with associated high grade silver in feeders at the base of the oxide zone. As precious metal mineralisation intruded up steeply dipping feeder structures from an underlying porphyry intrusion they migrated laterally along permeability horizons into andesite volcanics which were subsequently oxidised down to the current oxide-sulphide interface. Identifying the pattern of feeder structures is a very useful guide for exploration of the oxide-hosted mineralisation.”

Exploration Update

Drilling activity at Diablillos remains focused on the recently discovered JAC zone which is located several hundred metres southwest of the conceptual open pit that constrains the current Mineral Resource estimate (“MRE”) on the main Oculto deposit (M&I MRE containing 1.3 Moz gold and 109 Moz silver – Table 2).

To date, the Company has completed approximately 12,900 metres of drilling, in 65 holes, as part of the 22,000-metre Phase III program. Drilling results to date, combined with interpretation of magnetics, suggest that the new JAC zone remains open in multiple directions.

At the La Coipita project, drilling is progressing with the hole currently at a down-hole depth of approximately 130 metres. The deep hole is targeting the anticipated higher-grade zone of the porphyry system intercepted in hole DDHC 22-002.

Figure 1 – Diablillos Magnetic Map Plan View of Recent Drill Holes & Exploration Targets

Click Image To View Full Size

Figures 2 displays a long-section of the latest drill results from the JAC target, located to the southwest of the main Oculto deposit at Diablillos.

Figure 2 – Long Section Through Newly Announced Drill Holes in JAC Zone

Click Image To View Full Size

Collar Data

Hole Number	UTM Coordinates		Elevation	Azimuth	Dip	Depth (m)
DDH 22-083	E719676	N7198689	4,165	0	-60	200
DDH 22-086	E719550	N7198700	4,156	0	-60	173
DDH 23-002	E719625	N7198665	4,161	0	-60	182
DDH 23-003	E719551	N7198611	4,156	0	-60	168

About Diablillos

The 80 km2 Diablillos property is located in the Argentine Puna region - the southern extension of the Altiplano of southern Peru, Bolivia, and northern Chile - and was acquired from SSR Mining Inc. by the Company in 2016. There are several known mineral zones on the Diablillos property, with the Oculto zone being the most advanced with over 120,000 metres drilled to date. Oculto is a high-sulphidation epithermal silver-gold deposit derived from remnant hot springs activity following Tertiarty-age local magmatic and volcanic activity. Comparatively nearby examples of high sulphidation epithermal deposits include: Yanacocha (Peru); El Indio (Chile); Lagunas Nortes/Alto Chicama (Peru) Veladero (Argentina); and Filo del Sol (Argentina).

The most recent Mineral Resource estimate for the Oculto Deposit is shown in Table 2:

Table 2 - Oculto Mineral Resource Estimate – As of October 31, 2022

Category	Tonnage (000 t)	Ag (g/t)	Au (g/t)	Contained Ag (000 oz Ag)	Contained Au (000 oz Au)
Measured	19,336	98	0.88	60,634	544
Indicated	31,978	47	0.73	48,737	752
Measured & Indicated	51,314	66	0.79	109,370	1,297
Inferred	2,216	30	0.51	2,114	37

Notes: Effective October 31, 2022. Mineral Resources are not Mineral Reserves and have not demonstrated economic viability. The Mineral Resource estimate is N.I. 43-101 compliant and was prepared by Luis Rodrigo Peralta, B.Sc., FAusIMM CP(Geo), Independent Consultant. The mineralization estimated in the Mineral Resource is sub-horizontal with sub-vertical feeders and a reasonable prospect for eventual economic extraction by open pit methods. For additional information please see Technical Report on the Diablillos Project, Salta Province, Argentina, dated November 28, 2022, completed by Mining Plus, and available on www.SEDAR.com.

QA/QC and Core Sampling Protocols

AbraSilver applies industry standard exploration methodologies and techniques, and all drill core samples are collected under the supervision of the Company’s geologists in accordance with industry practices. Drill core is transported from the drill platform to the logging facility where drill data is compared and verified with the core in the trays. Thereafter, it is logged, photographed, and split by diamond saw prior to being sampled. Samples are then bagged, and quality control materials are inserted at regular intervals; these include blanks and certified reference materials as well as duplicate core samples which are collected in order to measure sample representivity. Groups of samples are then placed in large bags which are sealed with numbered tags in order to maintain a chain-of-custody during the transport of the samples from the project site to the laboratory.

All samples are received by the SGS offices in Salta who then dispatch the samples to the SGS preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in Lima, Peru where they are analyzed. All samples are analyzed using a multi-element technique consisting of a four acid digestion followed by ICP/AES detection, and gold is analyzed by 50g Fire Assay with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an ore grade AAS finish.

Qualified Persons

David O’Connor P.Geo., Chief Geologist for AbraSilver, is the Qualified Person as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects, and he has reviewed and approved the scientific and technical information in this news release.

About AbraSilver

AbraSilver is an advanced-stage exploration company focused on rapidly advancing its 100%-owned Diablillos silver-gold project in the mining-friendly Salta province of Argentina. The current Measured and Indicated Mineral Resource estimate for Diablillos consists of 51.3 Mt grading 66g/t Ag and 0.79g/t Au, containing approximately 109Moz silver and 1.3Moz gold, with significant further upside potential based on recent exploration drilling. The Company is led by an experienced management team and has long-term supportive shareholders including Mr. Eric Sprott. In addition, AbraSilver owns a portfolio of earlier-stage copper-gold projects including the La Coipita copper-gold project in the San Juan province of Argentina. AbraSilver is listed on the TSX-V under the symbol “ABRA” and in the U.S. under the symbol “ABBRF”.

For further information please visit the AbraSilver Resource website at www.abrasilver.com, our LinkedIn page at AbraSilver Resource Corp., and follow us on Twitter at www.twitter.com/abrasilver

Alternatively please contact:

John Miniotis, President and CEO

info@abrasilver.com

Tel: +1 416-306-8334

Cautionary Statements

This news release includes certain "forward-looking statements" under applicable Canadian securities legislation. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. All statements that address future plans, activities, events or developments that the Company believes, expects or anticipates will or may occur are forward-looking information. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. When considering this forward-looking information, readers should keep in mind the risk factors and other cautionary statements in the Company’s disclosure documents filed with the applicable Canadian securities regulatory authorities on SEDAR at www.sedar.com. The risk factors and other factors noted in the disclosure documents could cause actual events or results to differ materially from those described in any forward-looking information. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release