Advantage Lithium Corp. - Cauchari JV Drill Program Update

 

Initial results from CAU09 rotary hole average 662 mg/l lithium
Mg/Li ratio of 2.2:1

TSX Venture Exchange Symbol: AAL

VANCOUVER, Oct. 24, 2017 /CNW/ - Advantage Lithium Corp. (the "Company" or "Advantage Lithium") (TSX Venture: AAL) (OTCQX: AVLIF) is pleased to announce further positive progress with its Cauchari JV drilling and pumping program where three drill rigs are now expanding the depth and lateral extent of the existing NI43-101 mineral resource dated December 2016¹.

CAU09 drilling results

The second rotary hole CAU09 is located in the SE sector of the project, approximately 2.5km SW from recently completed CAU10. Filter and casing sections along with gravel pack were installed to the 400m hole depth. The hole was subsequently cleaned and developed prior to the preliminary pumping test and sampling completed on the hole. The flow rate from this initial test was 4 l/s, with filters installed in the hole in intervals between 60m and the planned depth of 400 metres. The hole was constructed with 8 inch steel casing and filters to a depth of 125 m, to provide a chamber for the pump to be installed in, with 6 inch casing and filters to the base of the hole at 400 m depth.

A preliminary pumping test of 2.5 hours has been completed on CAU09, with 21 samples taken during the test, averaging 662 mg/l lithium and 6,169 mg/l potassium, with an average low Mg/Li ratio of 2.2:1. Quality control/assurance included three duplicate, 5 standard and 3 blank samples. All analyses were completed in a commercially accredited laboratory in Argentina.² These initial pumped brine samples compare to an average of 682 mg/l for CAU10 and approximately 700 mg/l for Lithium Americas Corp. (LAC) hole PB1³, ~2.5 km to the northeast and ~2.5 km to the north respectively (refer to map fig.1).

CAU09 intersected a sequence of halite, clay and some sand like hole CAU10. The flow rate from the preliminary pumping test in CAU09 is similar to the closest LAC production well (PB1), which was flow tested at 4 l/s over 8 days³. Further to the north in the core of the salar CAU10 displayed a sustained flow rate of 2 l/s over the preliminary 48 hour pumping test.

The lithologies intersected in CAU09, CAU10 and PB1 are predominantly compact halite, confirming these holes are located in the halite core of the Cauchari salar. The halite core is interpreted to be limited to this central area of the salar, with more interbedded units of clay, halite, silt and sand located further to the south and east of CAU09, as intersected in drilling by Orocobre subsidiary South American Salars (SAS) in 2011. This area southeast of the halite core is now the focus of drilling with the remaining rotary holes (CAU08 and CAU11) in the SE sector. This will provide information on changes in sediment type and porosity/permeability away from the halite core.

NW Target Area

In salars it is typical that some areas display lower porosity and permeability characteristics (such as the halite core) and it is important to define areas with different flow and lithium grade characteristics for project planning and feasibility purposes. The operating Olaroz brine project ~20 km to the north of the Cauchari JV operates production wells extracting brine at a range of flow rates and lithium grades, with the most productive wells producing from sandy units (see Orocobre announcement - Olaroz Project Large Exploration Target Defined Beneath Existing Resource 23 October, 2014).

The Cauchari JV has been drilling sandy material in hole CAU07 in the NW target area, with more details to be provided as they become available.

New rotary drill holes in the SE Sector

In line with the program plan, the rotary drill rigs from hole CAU09 and CAU10 are currently drilling at sites CAU08 and CAU11 where they have reached the target depth of 400 m. These holes are now being widened to allow installation of pipe and filters. Drilling intersected a sequence of silt, clay, halite and sand. Further information will be provided as it comes available when wells are installed and sampled.

President & CEO Mr. David Sidoo said: "The drilling program has now picked up speed with three rigs on site. CAU09 has returned a lithium grade averaging 662 mg/l, which is very positive for the project and confirms our initial expectations of lithium brine chemistry that is similar to the nearby Olaroz lithium facility. The deeper drilling to 400 m has confirmed extension of brine to this depth, with positive implications for resource expansion. With holes CAU08 and CAU11 now having reached their target depths we look forward to reporting brine results from these holes and diamond hole CAU07 in the NW Sector in the near future."

The technical information in this news release has reviewed and approved on behalf of the company by Murray Brooker, MAIG, RPGEO, a "Qualified Person" as defined in NI 43-101.

About Advantage Lithium Corp.

Advantage Lithium Corp. is a resource company specializing in the strategic acquisition, exploration and development of lithium properties and is headquartered in Vancouver, British Columbia. The common shares of the company are listed on the TSX Venture Exchange (TSX-V:AAL), and the company is also traded on the OTCQX Best Market in the U.S. (OTCQX: AVLIF). The company has acquired a 100% interest in five projects in Argentina and up to a 75% interest in a sixth, called Cauchari. Cauchari is located just 20 km south of Orocobre's flagship Olaroz Lithium Facility.

Further information about the Company can be found at www.advantagelithium.com.

ADVANTAGE LITHIUM CORP.

Cautionary Statement:

Certain information contained in this press release constitutes "forward-looking information", within the meaning of Canadian legislation. Generally, these forward-looking statements can be identified by the use of forward-looking terminology such as "is expected","intends", or "has the potential to".Forward looking statements contained in this press release may include statements regarding the future operating or financial performance of Advantage that involve known and unknown risks and uncertainties which may not prove to be accurate. Actual results and outcomes may differ materially from what is expressed or forecasted in these forward-looking statements. Such statements are qualified in their entirety by the inherent risks and uncertainties surrounding future expectations. The forward-looking statements included in this press release are made as of the date of this press release and the Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as expressly required by applicable securities legislation.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCEAdvantage Lithium Corp

View original content with multimedia: http://www.newswire.ca/en/releases/archive/October2017/24/c1125.html