Kirkland Lake Gold Extends High-Grade, Visible-Gold Mineralization Down-Plunge of Fosterville Swan Zone

2019-12-03 / @nasdaq

 

  • High-grade Swan Zone (“Swan”) mineralization extended 80 m down-plunge
    • Key intercepts:    87.6 g/t Au over 7.6 m (ETW 5.5 m);
                                  45.0 g/t Au over 5.2 m (ETW 4.7 m); and
                                  59.1 g/t Au over 5.0 m (ETW 4.7 m)

 

  • Drilling confirms continuity of Lower Phoenix Gold System over 950 m down-plunge of Swan Zone, represents large target area for future exploration drilling
    • Key intercepts:    14.8 g/t Au over 5.9 m (ETW 4.5 m); and
                                  6.2 g/t Au over 18.0 m (ETW 13.8 m)
  • Expansion drilling into Cygnet Zone (“Cygnet”) returns high-grade, visible-gold (“VG”) bearing intersections, strike continuity of mineralization confirmed over 650 m
    • Key intercepts:    239 g/t Au(1) over 1.2 m (ETW 0.9 m);
                                  28.4 g/t Au(1) over 1.8 m (ETW 1.5 m);
                                  11.2 g/t Au over 5.4 m (ETW 4.5 m); and
                                  4.8 g/t Au over 58.7 m (ETW 20 m)
  • Additional exploration updates planned before year end for Fosterville (Robbin’s Hill), Macassa Mine and Northern Territor)
    (1)     Visible-gold drill intercept;
             Abbreviations include: VG: visible-gold; g/t Au: grams per tonne gold; ETW: estimated true width

TORONTO, Dec. 03, 2019 (GLOBE NEWSWIRE) -- Kirkland Lake Gold Ltd. (“Kirkland Lake Gold” or the “Company”) (TSX:KL) (NYSE:KL) (ASX:KLA) today announced new high-grade results from the ongoing underground drilling programs at the Fosterville Mine in Victoria, Australia. Recent underground drilling targeting additional growth in Mineral Reserves and Mineral Resources confirmed significant continuity of mineralization down-plunge and adjacent to existing Mineral Reserves in the Lower Phoenix System. In addition, underground infill drilling into Swan Mineral Reserves continues to return exceptional high-grade results containing VG providing confirmation of the geological model, underpinning confidence in the operation’s mine plan. Drill results reported are from 206 holes (51,521 m) that targeted infill and extension of the Lower Phoenix Mineral Resources. Drill results reported are post the December 2018 Mineral Resource and Mineral Reserve update. (See press release dated February 21, 2019.)

Tony Makuch, President and CEO of Kirkland Lake Gold, commented: “We have an extensive exploration program at Fosterville covering four main target areas, Lower Phoenix down-plunge of Swan, Cygnet, Harrier and Robbin’s Hill (Figure 1). Today’s results focus on the Lower Phoenix area. They are encouraging as they include the extension of high-grade, VG-bearing mineralization 80 m down-plunge of the Swan Zone and demonstrate that Lower Phoenix is an extremely large gold system, with continuity of the system having been confirmed to over 950 metres down‑plunge of our deepest Mineral Reserves. In addition, we continue to get strong results from drilling of the Cygnet Zone, where we have intersected high-grade, VG-bearing mineralization, including 239 g/t Au over 1.2 m (ETW 0.9 m). Such results provide significant resource growth potential immediately adjacent to existing underground infrastructure.

“We are also progressing well with other components of our exploration program. At Robbin’s Hill, there have been up to six surface drill rigs in operation over recent months, with encouraging results which we plan to release shortly. We also continue to drill the anticline offset target at Harrier South from underground drill platforms and advance our LODE program on district targets. Drilling at Harrier South remains at an early stage given the time required to extend the existing exploration drift and poor ground conditions encountered in some areas. The fact that we have already intersected quartz veins with VG similar in texture to those found in the Swan Zone is promising. We have not yet seen the ultra-high grades you get at Swan, but it is early days and we remain optimistic. Harrier South will continue to be a high-priority target with extensive drilling to continue into, and throughout, 2020.”

Lower Phoenix Extension Drilling Program

During 2019, underground diamond drilling targeting down-plunge of the Swan Mineral Reserves has continued to return encouraging results, demonstrating the extensive down-plunge extent of the Lower Phoenix System (Figure 2).

Progressive step out drilling over 2019 from the Harrier Link Drill Drive, spaced at 100 m x 50 m centres has now confirmed continuity of moderate to high-grade mineralization over a down-plunge distance of 950 m from December 2018 Mineral Reserves in the Lower Phoenix System (Figure 3). Reported drill results are from 22 holes (16,611 m), and include moderate to high grade, large width sulfide intercepts of 14.8 g/t Au over 5.9 m (ETW 4.5 m) in hole UDE210, 6.2 g/t Au over 18.0 m (ETW 13.8 m) in hole UDE204 and 7.3 g/t Au over 8.8 m (ETW 6.7 m) in hole UDE199. The drilling has now defined continuity of mineralization between the Swan and Lower Phoenix South Resource blocks (Swan South Zone) and, with a high frequency of 30 gram-metre intercepts, it is anticipated that substantial additions of Inferred Mineral Resources will be realized in end-of-year model updates as a result of this program.

This drilling has also identified mineralization directly footwall to Swan South in the Swan Footwall Splay Zone up to 250 m down-plunge of December 2018 Mineral Reserves. Results of 2.8 g/t Au over 15.7 m (ETW 12.0 m) in hole UDE200A and 42.6 g/t Au over 0.8 m (ETW 0.5 m) in hole UDE204 (Figure 4) highlight the potential for Mineral Resource expansion immediately footwall to the Swan South Zone down-plunge.

In August 2019, the establishment of the P4040 drill drive development enabled close space drill targeting of the down-plunge extensions of the Swan Mineral Reserves down to 25 m x 25 m centres with the aim to extend Indicated Mineral Resources to facilitate Mineral Reserve evaluation. Four underground drill rigs have been located in this drill platform since August and results returned demonstrate continuity of high-grade mineralization, including occurrences of quartz vein hosted VG enveloped by sulfide mineralization up to a distance of 150 m down-plunge of Mineral Reserves (Figure 3). Two intercepts containing VG outside Mineral Reserves are greater than 100 gram-m, with 87.6 g/t Au over 7.6 m (ETW 5.5 m) in hole UDH3132 and 45.0 g/t Au over 5.2 m (ETW 4.7 m), including 267 g/t Au over 0.7 m (ETW 0.7 m) in hole UDH3142 which occur 40 m and 80 m down-plunge from Mineral Reserve respectively. A further 11 drill hole intercepts from this program are greater than 30 gram-m and it is anticipated that Mineral Reserves will be extended down-plunge of the Swan Mineral Reserves in the end of year model updates.

Cygnet Drilling Program

Exploration drilling footwall to Swan in 2018 discovered significant mineralization on a west southwesterly dipping structure, Cygnet. Further drilling into the up-plunge projection of this target has returned several high-grade intercepts containing VG mineralization. Recent key intercepts into the Cygnet Zone are listed below, with further details provided in the commentary that follows:

Key Gold Intercepts:

  • 239 g/t Au(1) over 1.2 m (ETW 0.9 m), including 701 g/t Au(1) over 0.4 m (ETW 0.3 m) in hole UDE262;
  • 28.4 g/t Au(1) over 1.8 m (ETW 1.5 m) in hole UDE247; and
  • 11.2 g/t Au over 5.4 m (ETW 4.5 m) in hole UDH280
    (1) Visible gold drill intercept

Drill results returned to date in the Cygnet Zone demonstrate strike continuity of mineralization over a distance of approximately 650 m and dip continuity of mineralization over a vertical distance of approximately 300 m between the 6100mN and 6750mN and 4050RL and 3750RL (Figure 7).

The Cygnet structure sub-parallels the Swan structure and is positioned approximately 125m footwall (east) of the Swan Zone (Figure 6). The north northwest striking mineralized structure transects the eastern limb of an anticline and an anticline-syncline fold pair. The mineralized fault occurs east of the main anticlinal axis, and has an interpreted reverse displacement of approximately 30 m. A shallower structure named the Pen Fault, splays from the Cygnet structure footwall to the Benu Shale stratigraphic units and at the intersection point of these two structures is where occurrences of quartz hosted VG mineralization have been intersected. Further footwall (approximately 70 m), another structure named the Cob Fault has also been identified containing a consistent trend of sulfide mineralization.

Drilling further down-plunge of 6100mN into the projected position of the Cygnet Zone also demonstrates that significant mineralization persists approximately 550 m down-plunge. Four intercepts containing significant grades and widths of sulfide mineralization highlight the growth potential down-plunge on the Cygnet Zone including 11.1 g/t Au over 3.4 m (ETW 2.4 m) in hole UDE200, 7.9 g/t Au over 3.1 m (ETW 2.6 m) in hole UDE209, 6.6 g/t Au over 6.6 m (ETW 5.5 m) in hole UDE181A and 8.7 g/t Au over 2.3 m (ETW 2.1 m) in hole UDE185A.

Drilling undertaken to date in the Cygnet Zone has demonstrated sufficient continuity of mineralization and the Company expects to substantially extend Mineral Resources to the north of the December 2018 Cygnet block which hosts an Inferred Mineral Resource of 582Kt @ 6.9g/t Au for 120Koz Au. Opportunity exists for further expansion of Mineral Resources to the north and south and drill targeting of the Cygnet structure will continue into 2020. Drilling will also focus on infill drilling of Mineral Resources to increase geological confidence to facilitate mineral reserve evaluation on this attractive growth target positioned in close proximity to current infrastructure.

Swan Infill Drilling Program

Results from the ongoing underground infill drilling program targeting Swan, reaffirm the high-grade tenor of the Swan Mineral Reserves. Since the December 2018 Swan Mineral Reserve of 2.34Moz grading at 49.6 g/t Au, a total of 117 holes for 13,484 m have been drilled into this zone in 2019 for the purpose of optimizing development and stope positioning. Of the 117 results returned to date, 19 results returned greater than 1,000 gram-metres and an additional 44 results returned greater than 100 gram-metres (Figure 5). Key intercepts over 2,000 gram-metres include;

High-Grade, Visible-Gold Bearing Intercepts >2000 gram-metres include:

  • 924 g/t Au over 3.6 m (ETW 3.2 m), including 6,590 g/t Au over 0.5 m (ETW 0.4 m) in hole UDH2872;
  • 918 g/t Au over 7.0 m (ETW 6.8 m), including 1,722 g/t Au over 3.7 m (ETW 3.3 m) in hole UDH3024;
  • 625 g/t Au over 3.6 m (ETW 3.3 m), including 6,123 g/t Au over 0.35 (ETW 0.3 m) in hole UDH2483;
  • 488 g/t Au over 5.0 m (ETW 4.7 m), including 2,527 g/t Au over 1.0 m (ETW 0.9 m) in hole UDH3171;
  • 229 g/t Au over 11.2 m (ETW 11 m), including 3,520 g/t Au over 0.6 m (ETW 0.6 m) in hole UDH3103;
  • 365 g/t Au over 6.8 m (ETW 6.1 m), including 1,629 g/t Au over 1.2 m (ETW 1 m) in hole UDH3101;
  • 367 g/t Au over 6.3 m (ETW 5.9 m), including 1,058 g/t Au over 2.1 m (ETW 2 m) in hole UDH2863

Intercepts through the Swan Footwall Splay also returned some exceptional high-grade, VG intercepts, including one over 2,000 gram-metres and a further three intercepts over 100 gram-metres. The Swan Footwall Splay Fault emanates from and branches off the Swan Fault at approximately 6400mN and 4000mRL (Figures 4 & 6). Mineralized widths containing significant VG grades are typically largest on this fault immediately footwall to the Swan Fault. Key infill intercepts returned that contain VG mineralization include;

Key Gold Intercepts:

  • 1,083 g/t Au over 2.8 m (ETW 2.6 m), including 8,610 g/t Au over 0.4 m (ETW 0.3 m) in hole UDH3108;
  • 40.8 g/t Au over 4.8 m (ETW 4.4 m) in hole UDH3103;
  • 52.4 g/t Au over 2.2 m (ETW 2.0 m) in hole UDH3104; and
  • 38.0 g/t Au over 3.8 m (ETW 3.5 m) in hole UDH3112

Results returned from infill drilling into the Swan Mineral Reserves to a spacing of 12.5 m x 12.5 m have verified the continuity of very high-grade mineralization in Swan. This drilling, coupled with model reconciliation performance, has provided increased confidence in the geological model which underpins the mine plan.

To view the figures accompanying the press release, please click on the following links:

Figure 1 – Location Map – Fosterville Gold Mine: https://www.globenewswire.com/NewsRoom/AttachmentNg/ab0f4632-2b7a-4edf-960e-9080974197a6

Figure 2 – Lower Phoenix System: https://www.globenewswire.com/NewsRoom/AttachmentNg/a009bbdc-dc7b-43d9-a270-e67b70fa8ee6

Figure 3 – Swan South Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/09b331b7-15e5-44e6-9949-87bff1c43d35

Figure 4 – Swan Footwall Splay Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/f4406c30-0d5b-4012-ad55-188fade78691

Figure 5 – Swan Reserve Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/c2261dcf-7bd3-4c46-b1cd-ea7c173e3851

Figure 6 – Cross Section, Lower Phoenix and Cygnet: https://www.globenewswire.com/NewsRoom/AttachmentNg/1c54b575-57ea-424e-b7f9-320369ea6272

Figure 7 – Cygnet, Pen & Cob Fault Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/c1bbfefe-7664-48ac-aad9-b0feda2217a7

Qualified Persons

Troy Fuller, MAIG, Director of Exploration, Australia, is a "Qualified Person" as such term is defined in National Instrument 43-101 and has reviewed and approved the technical information and data included in this News Release.

For further information regarding the Company’s 2018 Mineral Reserves and Mineral Resources estimates for the Fosterville Gold Mine, please refer to the Company’s news release dated February 21, 2019 and the Technical Report entitled “Updated NI 43-101 Technical Report Fosterville Gold Mine In the State of Victoria, Australia” effective December 31, 2018.

Drilling and Underground Sampling Assay QAQC

Kirkland Lake Gold has in place quality-control systems to ensure best practice in drilling, sampling and analysis of drill core. All diamond drill hole collars (Table 2) are accurately surveyed using a Leica TS16 Total Station instrument and down-hole deviations are measured by either electronic gyro or single-shot instruments.

Sampling consisted of diamond drill core that was either full core or half core sampled. Half core samples were cut longitudinally in half with a diamond saw; one-half of the drill core was sent to an independent laboratory for analysis and the other drill core half retained for reference. Sample pulps are returned from the assay laboratory for reference and future geological or metallurgical studies. Drill core sample intervals vary between 0.3 and 1.2 m in length and were determined from logging of sulfide and visible gold to geological boundaries.

Samples containing VG or considered likely to contain VG were separated from sulfide gold samples and dispatched independently for assaying. At the laboratory, “VG” jobs were processed through a single pulverizer and material barren of gold (‘quartz wash’) was crushed before and after each sample to minimize the potential for gold to contaminate successive samples.

Assays are either based on 25-gram or 40-gram charge fire assay. Mean grades are calculated using a variable lower grade cut-off (generally 2 g/t Au) and maximum 2 m internal dilution. No upper gold grade cut is applied to the data. However, during future Mineral Resource studies the requirement for assay top cutting will be assessed.

The majority of samples were assayed at On Site Laboratories, an independent laboratory in Bendigo, Victoria. The facility is registered ISO 9001:2008 (CERT-C33510). Some samples were assayed at Bureau Veritas, Adelaide. This facility is registered ISO 9001 : 2015 (CERT RN – 44 100 160145) and NATA accredited (1526).

About Kirkland Lake Gold Ltd.

Kirkland Lake Gold Ltd. is a growing gold producer operating in Canada and Australia that produced 723,701 ounces in 2018 and is on track to achieve significant production growth over the next three years, including target production of 950,000 – 1,000,000 ounces in 2019, 930,000 – 1,010,000 ounces in 2020 and 995,000 – 1,055,000 ounces in 2021. The production profile of the Company is anchored by two high-grade, low-cost operations, including the Macassa Mine located in Northern Ontario and the Fosterville Mine located in the state of Victoria, Australia. Kirkland Lake Gold's solid base of quality assets is complemented by district scale exploration potential, supported by a strong financial position with extensive management and operational expertise.

Cautionary Note Regarding Forward-Looking Information

This News Release includes certain "forward-looking statements". All statements other than statements of historical fact included in this release are forward-looking statements that involve various risks and uncertainties. These forward-looking statements include, but are not limited to, statements with respect to planned exploration programs, costs and expenditures, changes in Mineral Resource estimates, potential growth in Mineral Resources, conversion of Mineral Resources to proven and probable Mineral Reserves, and other information that is based on forecasts of future operational or financial results, estimates of amounts not yet determinable and assumptions of management. These forward-looking statements include, but are not limited to, statements with respect to future exploration potential, project economics, timing and scope of future exploration, anticipated costs and expenditures, changes in mineral resources and conversion of mineral resources to proven and probable reserves, and other information that is based on forecasts of future operational or financial results, estimates of amounts not yet determinable and assumptions of management.

Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as "expects" or "does not expect", "is expected", "anticipates" or "does not anticipate", "plans", "estimates" or "intends", or stating that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved) are not statements of historical fact and may be "forward-looking statements." Forward-looking statements are subject to a variety of risks and uncertainties that could cause actual events or results to differ from those reflected in the forward-looking statements. Exploration results that include geophysics, sampling, and drill results on wide spacings may not be indicative of the occurrence of a mineral deposit. Such results do not provide assurance that further work will establish sufficient grade, continuity, metallurgical characteristics and economic potential to be classed as a category of mineral resource. A mineral resource that is classified as "inferred" or "indicated" has a great amount of uncertainty as to its existence and economic and legal feasibility. It cannot be assumed that any or part of an "indicated mineral resource" or "inferred mineral resource" will ever be upgraded to a higher category of resource. Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into proven and probable reserves.

There can be no assurance that forward-looking statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company’s expectations include, among others, risks related to international operations, risks related to obtaining the permits required to carry out planned exploration or development work, the actual results of current exploration activities, conclusions of economic evaluations and changes in project parameters as plans continue to be refined as well as future prices of gold, as well as those factors discussed in the section entitled "Risk Factors" in the Company’s Annual Information Form, financial statements and related MD&A for the periods ended December 31, 2017 and March 31, 2018 and other disclosures of "Risk Factors" by the Company and its predecessors, which are filed with the securities regulatory authorities in certain provinces in Canada and available on SEDAR. Although the Company has attempted to identify key factors that could cause actual results to differ materially, there may be other factors that cause unanticipated and unintended results. There can be no assurance that such statements will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.

Cautionary Note to U.S. Investors - Mineral Reserve and Resource Estimates

All resource and reserve estimates included in this news release or documents referenced in this news release have been prepared in accordance with Canadian National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") - CIM Definition Standards on Mineral Resources and Mineral Reserves, adopted by the CIM Council, as amended (the "CIM Standards"). NI 43-101 is a rule developed by the Canadian Securities Administrators, which established standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects. The terms "mineral reserve", "proven mineral reserve" and "probable mineral reserve" are Canadian mining terms as defined in accordance with NI 43-101 and the CIM Standards. These definitions differ materially from the definitions in SEC Industry Guide 7 ("SEC Industry Guide 7") under the United States Securities Act of 1933, as amended, and the Exchange Act.

In addition, the terms "mineral resource", "measured mineral resource", "indicated mineral resource" and "inferred mineral resource" are defined in and required to be disclosed by NI 43-101 and the CIM Standards; however, these terms are not defined terms under SEC Industry Guide 7 and are normally not permitted to be used in reports and registration statements filed with the U.S. Securities and Exchange Commission (the "SEC"). Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into reserves. "Inferred mineral resources" have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies, except in very limited circumstances. Investors are cautioned not to assume that all or any part of a mineral resource exists, will ever be converted into a mineral reserve or is or will ever be economically or legally mineable or recovered.

FOR FURTHER INFORMATION PLEASE CONTACT

Anthony Makuch, President, Chief Executive Officer & Director
Phone: +1 416-840-7884
E-mail: tmakuch@klgold.com

Mark Utting, Vice-President, Investor Relations
Phone: +1 416-840-7884
E-mail: mutting@klgold.com


Table 1:Drill Assay Intercepts for the Swan, Swan Footwall Splay, Swan South, Cygnet Zone and Cob Diamond Drilling, Lower Phoenix Mineralized System, Fosterville Gold Mine
 (The results are later than those presented in the December 31, 2018 Technical Report on the Mineral Resources and Mineral Reserves of The Fosterville Gold Mine, dated April 1, 2019, and available on sedar.com)


Hole IDFrom
(m)		To
(m)		Downhole Interval
(m)		Estimated True Width (m)Gold Grade
(g/t Au)		Geological Structure
Swan Fault Mineralization - Drill Intercepts within Mineral Reserves
UDH2483 (1)353.65357.253.63.3625Swan
Including (1)353.65354.00.350.36,123Swan
UDH2700 (1)362.45371.48.958.410.9Swan
UDH2717 (1)100.15107.257.14.8381Swan
Including (1)101.2102.21.00.7922Swan
And (1)104.95105.51.851.3934Swan
UDH2729 (1)355.5358.12.62.463.6Swan
Including (1)356.05356.50.450.4334Swan
UDH2787157.35164.36.956.526.0Swan
UDH2829297.1305.28.16.65.8Swan
UDH2832 (1)76.579.02.52.234.8Swan
UDH283477.6580.452.82.319.1Swan
UDH283572.673.651.050.911.3Swan
UDH2836 (1)115.4125.8510.454.4170Swan
Including (1)117.25119.051.80.8623Swan
UDH2837 (1)96.75102.25.452.7119Swan
Including (1)101.2101.650.450.21,150Swan
UDH2838 (1)100.0106.256.254.028.7Swan
UDH2839 (1)99.95102.52.551.8123Swan
Including (1)101.05101.40.350.3804Swan
UDH2840 (1)82.9588.15.153.314.9Swan
UDH284192.3592.70.350.219.9Swan
UDH2842 (1)83.292.18.95.1123Swan
Including (1)88.189.251.150.7874Swan
UDH2843 (1)76.478.11.71.5704Swan
Including (1)76.477.00.60.51,410Swan
UDH2844 (1)81.184.02.92.637.4Swan
UDH2845 (1)70.077.77.77.2133Swan
Including (1)72.274.92.72.5352Swan
UDH2846 (1)82.084.82.82.3202Swan
Including (1)83.1584.151.00.8560Swan
UDH2847 (1)106.45109.453.01.555.9Swan
Including (1)108.3108.70.40.2400Swan
UDH2848 (1)95.398.052.751.8234Swan
UDH2849 (1)96.597.22.72.2840Swan
Including (1)96.599.20.70.63,220Swan
UDH285084.5586.51.951.644.7Swan
UDH2851 (1)77.5578.91.351.2120Swan
UDH285270.4574.03.552.710.6Swan
UDH2853 (1)71.1575.74.553.9302Swan
Including (1)72.574.151.651.4824Swan
UDH2854 (1)69.072.63.63.3287Swan
Including (1)72.072.60.60.51,710Swan
UDH2855 (1)67.969.31.41.340.3Swan
UDH2856 (1)66.0567.41.351.3339Swan
UDH285765.467.52.12.013.4Swan
UDH2858 (1)66.467.51.11.134.3Swan
UDH2859 (1)63.666.63.02.8505Swan
Including (1)66.066.30.30.34,060Swan
UDH2860 (1)60.866.65.85.732.3Swan
Including (1)63.1564.41.251.2114Swan
UDH2862 (1)65.271.556.355.534.4Swan
Including (1)71.071.550.550.5318Swan
UDH2863 (1)64.1570.456.35.9367Swan
Including (1)64.1566.252.12.01,058Swan
UDH2864 (1)65.268.53.33.1232Swan
Including (1)65.766.250.550.51,340Swan
UDH2865 (1)64.465.91.51.4214Swan
Including (1)65.065.40.40.4680Swan
UDH2866 (1)57.768.410.710.1138Swan
Including (1)61.6562.91.251.21,094Swan
UDH286761.2562.951.71.610.4Swan
UDH2868 (1)57.067.210.29.945.2Swan
Including (1)59.5559.850.30.31,180Swan
UDH2869 (1)54.2567.513.2512.0145Swan
Including (1)59.962.12.22.0840Swan
UDH287070.072.552.552.2269Swan
UDH2871 (1)67.269.221.957.6Swan
Including (1)68.869.20.40.4263Swan
UDH2872 (1)63.2566.83.553.2924Swan
Including (1)63.964.350.450.46,590Swan
UDH287383.484.91.51.236.2Swan
UDH2874 (1)80.3583.93.552.9117Swan
Including (1)80.881.70.90.7430Swan
UDH287772.373.150.850.7149Swan
UDH287876.378.21.91.633.6Swan
UDH288069.070.451.451.312.0Swan
UDH288268.569.71.21.0128Swan
UDH288366.167.41.31.365.7Swan
UDH291755.856.50.70.56.0Swan
UDH291953.457.443.34.8Swan
UDH292053.764.010.37.412.8Swan
UDH2928289.6291.62.01.79.3Swan
UDH297163.465.82.41.810.0Swan
UDH297268.671.853.252.29.1Swan
UDH297370.472.72.32.04.5Swan
UDH297573.878.254.453.16.6Swan
UDH297682.687.75.13.815.8Swan
UDH297964.9566.31.351.115.2Swan
UDH298179.384.14.82.65.1Swan
UDH298359.7562.12.352.08.8Swan
UDH298484.087.13.12.78.2Swan
UDH298573.277.03.83.212.2Swan
UDH298678.188.4510.388.89.2Swan
UDH298790.6594.153.53.014.5Swan
UDH2995 (1)70.2571.951.71.06.3Swan
UDH3017 (1)31.441.09.69.218.2Swan
UDH3023 (1)37.7543.455.75.6306Swan
Including (1)42.6543.050.40.34,000Swan
UDH3024 (1)33.040.07.06.8918Swan
Including (1)36.039.73.73.31,722Swan
UDH3054111.8113.51.71.526.4Swan
UDH3055106.9112.96.03.634.4Swan
UDH3060 (1)63.671.68.07.8184Swan
UDH3061 (1)63.368.655.355.2587.6Swan
UDH3063 (1)67.674.06.46.217.9Swan
UDH306492.8596.63.752.53.9Swan
UDH3064A90.6592.92.251.8177Swan
UDH3065 (1)82.486.84.43.514.1Swan
UDH3066 (1)73.9580.556.66.097.1Swan
UDH3067 (1)67.477.09.69.2139Swan
UDH307649.4552.052.61.433.2Swan
UDH3077 (1)58.262.74.52.2320Swan
UDH3101 (1)77.584.256.756.1365Swan
Including (1)81.082.151.151.01,629Swan
UDH3102 (1)75.6577.72.052.034.1Swan
UDH3103 (1)65.176.311.211.0229Swan
Including (1)68.769.30.60.63,520Swan
UDH310466.272.05.85.722.1Swan
UDH3105 (1)65.172.17.06.825.8Swan
Including (1)71.171.50.40.4339Swan
UDH3106 (1)74.079.25.24.3120Swan
Including (1)77.0578.81.751.5322Swan
UDH310796.3597.30.950.77.6Swan
UDH3108 (1)83.4588.555.14.248.8Swan
Including (1)85.986.30.40.3368Swan
UDH310977.477.950.550.58.6Swan
UDH3110 (1)74.8576.451.61.5419Swan
Including (1)75.575.950.450.41,300Swan
UDH3111 (1)68.978.910.09.935.4Swan
Including (1)69.2569.80.550.5472Swan
UDH3112 (1)70.673.352.752.4791Swan
Including (1)71.1571.80.650.63,300Swan
UDH3113 (1)71.375.03.73.740.6Swan
Including (1)72.172.40.30.3395Swan
UDH311470.774.23.52.716.4Swan
UDH311583.2588.65.354.314.6Swan
UDH311694.2595.10.850.831.4Swan
UDH311791.593.41.91.769.3Swan
UDH3118 (1)95.897.151.351.1111Swan
Including (1)96.196.450.350.3356Swan
UDH3119198.9212.1513.2511.53.0Swan
UDH3119205.25212.156.96.53.8Swan
UDH3119A199.8203.13.33.17.0Swan
UDH3164 (1)101.85103.651.81.615.9Swan
UDH316592.4594.92.451.910.6Swan
UDH3166 (1)76.078.12.12.0298Swan
Including (1)77.077.40.40.41,470Swan
UDH3171 (1)81.186.15.04.7488Swan
Including (1)84.8585.80.950.92,527Swan
UDH3172 (1)67.3574.757.47.4159Swan
Including (1)73.2574.00.750.81,448Swan
UDH3174 (1)67.174.57.46.734.7Swan
Including (1)70.3571.30.950.9230Swan
UDH3176A83.687.053.453.412.6Swan
UDH3177 (1)88.095.47.46.139.5Swan
Including (1)94.895.10.30.3730Swan
UDH3178 (1)84.792.78.05.1131Swan
Including (1)86.3586.650.30.22,250Swan
UDH3180158.1163.555.454.215.0Swan
UDH3184A (1)148.75155.87.056.117.7Swan
Including (1)150.8151.250.450.4145Swan
UDH3186 (1)118.65120.01.350.9321Swan
Including (1)118.65119.30.650.4639Swan
UDH3188 (1)121.0128.757.752.7342Swan
Including (1)125.9127.21.30.41,612Swan
Swan Footwall Splay Mineralization - Drill Intercepts within Mineral Reserves
UDH306177.5578.71.151.118.8Swan FW Splay
UDH306393.6595.01.351.05.4Swan FW Splay
UDH310195.996.70.80.76.5Swan FW Splay
UDH310287.688.71.11.06.5Swan FW Splay
UDH3103 (1)76.381.14.84.440.8Swan FW Splay
Including (1)79.0579.350.30.3267Swan FW Splay
UDH3104 (1)76.8579.02.152.052.4Swan FW splay
Including (1)77.978.250.350.3266Swan FW splay
UDH310582.3583.951.61.54.2Swan FW splay
UDH310798.3599.10.750.716.1Swan FW splay
UDH3108 (1)90.8593.652.82.61,083Swan FW splay
Including (1)90.8591.20.350.38,610Swan FW splay
UDH310984.186.01.91.94.4Swan FW splay
UDH3111 (1)81.282.51.31.362.4Swan FW splay
UDH3112 (1)83.4584.253.753.538.0Swan FW splay
Including (1)83.7584.250.50.5229Swan FW splay
UDH311384.185.81.71.628.6Swan FW splay
UDH311492.297.14.94.96.9Swan FW splay
UDH311595.1596.31.150.48.0Swan FW splay
UDH316682.285.02.82.613.0Swan FW splay
UDH306076.2579.12.852.72.9Swan FW Splay
Swan South Mineralization - Drill Intercepts outside of Mineral Reserves
UDE175A941.3956.214.911.44.4Swan South
UDE181A927.1932.555.454.28.7Swan South
UDE184819.75823.03.252.58.8Swan South
UDE184A803.7808.64.93.86.7Swan South
UDE184B772.6777.04.43.45.0Swan South
UDE184C772.45777.44.953.86.8Swan South
UDE185A871.9879.17.27.17.9Swan South
UDE199773.0781.758.756.77.3Swan South
UDE200716.5732.015.511.94.9Swan South
UDE200A719.0726.87.86.04.6Swan South
UDE201835.45837.652.21.70.2Swan South
UDE203622.4626.44.03.12.2Swan South
UDE204634.3652.31813.86.2Swan South
UDE205627.5633.656.154.710.4Swan South
UDE206656.9660.03.12.45.5Swan South
UDE207759.2759.70.50.40.0Swan South
UDE208675.0681.86.85.29.9Swan South
Including678.2678.70.50.465.2Swan South
UDE209681.5685.03.52.71.8Swan South
UDE210709.6715.55.94.514.8Swan South
UDE211729.4735.25.84.47.6Swan South
UDE212A1045.11045.50.40.32.6Swan South
UDE265621.2621.80.60.52.1Swan South
UDH2482390.0402.6512.657.33.6Swan South
UDH2489 (1)386.0391.05.04.759.1Swan South
Including (1)389.33900.70.7319Swan South
UDH2831257.0258.71.71.614.6Swan South
UDH3068 (1)67.375.07.77.563.2Swan South
UDH3094392.4393.250.850.86.2Swan South
UDH3120202.3212.710.410.18.0Swan South
UDH3122199.1204.35.24.25.8Swan South
UDH3123199.3200.10.80.82.8Swan South
UDH3124198.6199.81.21.112.5Swan South
UDH3126254.45260.96.455.66.4Swan South
UDH3127 (1)249.9253.353.453.019.7Swan South
Including (1)251.8252.10.30.3141Swan South
UDH3128230.1233.953.853.58.5Swan South
UDH3129237.0240.53.52.98.1Swan South
UDH3130231.85234.02.152.013.1Swan South
UDH3131 (1)266.7277.8511.29.76.8Swan South
UDH3132 (1)268.3275.857.555.587.6Swan South
UDH3133A299.35300.10.750.75.4Swan South
UDH3134299.0303.04.02.82.7Swan South
UDH3135248.2255.57.36.76.4Swan South
UDH3136254.8259.95.15.04.3Swan South
UDH3137 (1)246.9249.42.52.12.2Swan South
UDH3138249.25253.94.654.25Swan South
UDH3139247.2251.24.03.76.3Swan South
UDH3140237.7241.33.63.59.3Swan South
UDH3141239.65240.71.051.04.3Swan South
UDH3142 (1)255.5260.655.154.745Swan South
Including (1)258.7259.40.70.7267Swan South
UDH3143270.2283.112.912.126.4Swan South
UDH3145 (1)242.25243.51.251.240.4Swan South
Including (1)242.25242.950.70.773.6Swan South
UDH3146 (1)239.1245.56.46.34.6Swan South
UDH3148236.65240.33.653.68.5Swan South
UDH3148A235.9240.04.13.65.9Swan South
UDH3149245.45249.64.154.06.9Swan South
UDH3149A238.0239.71.71.616.0Swan South
UDH3150231.1237.66.56.59.0Swan South
UDH3151234.4236.452.051.96.2Swan South
UDH3153234.0237.33.33.38.9Swan South
UDH3154238.75245.456.76.313.5Swan South
UDH3156242.0249.27.27.18.7Swan South
UDH3179152.55155.452.92.97.1Swan South
UDH3182139.2140.51.31.14.5Swan South
UDH3183142.2143.71.51.210.2Swan South
UDH3228248.0250.052.051.85.2Swan South
Swan Footwall Splay Mineralization - Drill Intercepts outside of Mineral Reserves
UDE200A728.25743.9515.712.02.8Swan FW Splay
UDE204671.9672.70.80.542.6Swan FW Splay
UDE208684.5687.02.52.36.2Swan FW Splay
UDH3124225.2226.00.80.817.9Swan FW Splay
UDH3130248.0249.11.11.07.9Swan FW splay
Cygnet Mineralized Zone - Drill intercepts outside of Mineral Reserves
UDE181A1,124.05 1,130.65 6.65.56.6Cygnet
Including1,127.11,127.40.30.327.9Cygnet
UDE184A956.7957.00.30.31.8Cygnet
UDE185A1,054.61,056.92.32.18.7Cygnet
UDE195222.0280.758.720.04.8Cygnet
UDE2011030.510310.50.42.7Cygnet
UDE203770.6771.00.40.32.9Cygnet
UDE204820.7821.00.30.35.0Cygnet
UDE205804.45804.90.450.44.6Cygnet
UDE206848.1848.40.30.35.0Cygnet
UDE2071011.51011.950.50.42.1Cygnet
UDE208790.6790.90.30.31.8Cygnet
UDE209888.0891.13.12.67.9Cygnet
UDE210916.6917.30.70.63.2Cygnet
UDE211975.2977.82.62.23.3Cygnet
UDE243617.15619.752.62.52.8Cygnet
UDE245207.7208.91.21.12.2Cygnet
UDE246225.9227.41.51.211.5Cygnet
UDE247 (1)212.6214.41.81.528.4Cygnet
UDE248277.05278.651.61.37.9Cygnet
UDE249315.45316.751.31.18.3Cygnet
UDE250338.9340.01.10.93.4Cygnet
UDE258296.1297.151.050.93.0Cygnet
UDE259318.4325.26.85.64.4Cygnet
UDE260319.2320.91.71.03.5Cygnet
UDE261364.1365.31.21.09.3Cygnet
UDE263391.35392.351.00.87.3Cygnet
UDE265754.95756.251.31.19.4Cygnet
UDE280274.65280.055.44.511.2Cygnet
UDE282355.3357.52.21.20.1Cygnet
UDE282A356.0357.01.00.80.0Cygnet
UDH2831371.0377.06.05.76.1Cygnet
UDH2886384.65388.153.53.211.4Cygnet
UDH2887400.65405.64.953.84.1Cygnet
UDH2928379.0381.953.02.84.9Cygnet
UDH293197.0101.34.32.33.3Cygnet
UDH293258.059.21.21.018.8Cygnet
UDH293369.973.853.953.011.4Cygnet
UDH3068208.1209.751.651.46.1Cygnet
UDH3094477.4479.552.151.97.2Cygnet
UDH3122266.7272.65.35.212.3Cygnet
UDH3163341.25343.01.751.42.6Cygnet
UDH3203325.0327.22.21.42.4Cygnet
UDH3106240.1240.80.70.510.7Cygnet
UDE248 (1)194.55196.051.51.39.2Pen
UDE249225.95226.70.750.37.3Pen
UDE259272.3272.60.30.30.0Pen
UDE261333.55334.551.00.623.1Pen
UDE262 (1)317.7318.91.20.9239Pen
Including (1)318.05318.450.40.3701Pen
UDE263315.2316.10.90.55.7Pen
UDE280198.0200.62.62.13.1Pen
Cob Fault Mineralization - Drill Intercepts outside of Mineral Reserves
UDE1841,049.01,051.02.01.75.7Cob
UDE185A1,079.71,080.40.70.65.7Cob
UDE200922.25925.653.42.411.1Cob


 Notes:
 (1) – Visible-gold observed in drill intercept.

Drill intercepts greater than 30 Gram-Metre (gold grade x estimated true width) or containing visible-gold are shown in bold text.

For Table 2 (below), collar locations are in Fosterville Mine Grid coordinate system.

For Table 2 (below), Collar Plunges with negative values indicate drilling downwards from the horizontal.


Table 2:                 Underground Diamond Drill Hole Collar Locations, Fosterville Gold Mine

Hole IDNorthing
(m)		Easting
(m)		Elevation
(m)		Collar
Azimuth (°)		Collar
Plunge (°)		Total Depth
(m)		Drilled Metres
Underground Diamond Drilling inside Swan Mineral Reserves
UDH24836,2261,3414,19484.9-43.8377.9377.9
UDH27006,2261,3414,19492.0-63.0431.8431.8
UDH27176,5771,6224,101229.4-14.4117.0117.0
UDH27296,2261,3414,19586.0-49.5384.2384.2
UDH27876,3921,3954,05596.2-39.9219.0219.0
UDH28296,3531,4064,192113.7-31.5349.0349.0
UDH28326,4011,5124,04440.02.089.089.0
UDH28346,4011,5114,04548.05.096.096.0
UDH28356,4011,5124,04454.0-1.088.088.0
UDH28366,4101,4974,04517.017.0147.4147.4
UDH28376,4101,4974,04517.09.0119.3119.3
UDH28386,4101,4974,04529.013.5123.4123.4
UDH28396,4101,4984,04536.013.0114.0114.0
UDH28406,4101,4974,04527.06.0108.1108.1
UDH28416,4101,4974,04535.09.0105.0105.0
UDH28426,4101,4974,04418.02.0101.8101.8
UDH28436,4101,4974,04419.0-9.093.093.0
UDH28446,4101,4974,04425.0-2.098.598.5
UDH28456,4101,4974,04427.0-10.092.492.4
UDH28466,4101,4974,04433.01.093.093.0
UDH28476,3971,5144,04527.016.0116.8116.8
UDH28486,3971,5144,04539.015.5115.0115.0
UDH28496,3961,5144,04529.011.0107.5107.5
UDH28506,3961,5144,04528.04.0104.9104.9
UDH28516,3971,5144,04426.0-4.098.998.9
UDH28526,3961,5144,04441.0-4.084.084.0
UDH28536,3961,5144,04424.0-11.084.084.0
UDH28546,3961,5144,04433.0-9.081.081.0
UDH28556,3961,5144,04445.0-12.079.079.0
UDH28566,3901,5174,04445.0-20.080.080.0
UDH28576,3901,5174,04449.0-28.078.078.0
UDH28586,3901,5174,04439.0-32.089.089.0
UDH28596,3901,5174,04331.0-38.586.886.8
UDH28606,3901,5174,04335.0-50.087.087.0
UDH28626,4071,5044,04414.0-18.083.983.9
UDH28636,4071,5044,04425.0-20.080.980.9
UDH28646,4071,5044,04318.0-26.081.081.0
UDH28656,4071,5044,04338.0-23.078.078.0
UDH28666,4071,5044,04329.0-31.075.075.0
UDH28676,4071,5044,04340.0-34.575.075.0
UDH28686,4071,5044,04335.0-43.087.087.0
UDH28696,4071,5044,04328.0-52.584.084.0
UDH28706,3901,5174,04431.0-17.086.986.9
UDH28716,3901,5174,04429.0-28.078.078.0
UDH28726,3911,5174,04319.0-57.083.083.0
UDH28736,3901,5174,04548.07.0101.9101.9
UDH28746,3901,5174,04556.04.090.090.0
UDH28776,3901,5174,04456.0-4.083.683.6
UDH28786,3901,5174,04464.00.089.989.9
UDH28806,3901,5174,04449.0-9.084.084.0
UDH28826,3901,5174,04460.0-9.083.083.0
UDH28836,3901,5174,04455.0-18.077.077.0
UDH29176,4841,6724,086234.05.069.169.1
UDH29196,4631,6854,087244.015.071.771.7
UDH29206,4631,6854,086245.06.070.770.7
UDH29286,3531,4064,193100.7-26.3415.7415.7
UDH29716,4111,7184,085256.417.983.183.1
UDH29726,4111,7184,084260.311.286.686.6
UDH29736,4101,7194,084244.77.892.992.9
UDH29756,4101,7194,084249.25.889.989.9
UDH29766,4101,7194,084250.8-3.7126.1126.1
UDH29796,4321,7044,085254.16.992.992.9
UDH29816,4321,7034,085258.0-2.292.692.6
UDH29836,4421,6974,086259.510.180.680.6
UDH29846,4401,6974,085250.6-8.198.998.9
UDH29856,4101,7194,084229.55.9100.0100.0
UDH29866,4101,7194,084234.8-4.4108.0108.0
UDH29876,4091,7194,084248.7-7.6104.7104.7
UDH29956,4841,6724,086234.0-2.383.883.8
UDH30176,4341,5104,03811.0-44.050.550.5
UDH30236,4341,5094,03822.9-58.450.550.5
UDH30246,4351,5224,03817.8-19.648.848.8
UDH30546,3141,5364,04255.010.7126.1126.1
UDH30556,3141,5364,04261.111.3113.5113.5
UDH30606,3141,5364,04154.4-31.586.886.8
UDH30616,3141,5364,04062.7-39.589.089.0
UDH30636,3141,5364,04058.2-59.9102.0102.0
UDH30646,3471,5284,04655.3-1.1107.5107.5
UDH3064A6,3481,5284,04555.3-1.1110.2110.2
UDH30656,3471,5284,04559.9-6.598.598.5
UDH30666,3471,5284,04552.9-15.989.689.6
UDH30676,3471,5284,04569.8-26.589.789.7
UDH30766,4081,5554,04875.911.362.062.0
UDH30776,4081,5554,04863.521.674.674.6
UDH31016,3311,5324,04456.0-8.099.299.2
UDH31026,3311,5324,04464.0-11.0100.7100.7
UDH31036,3311,5324,04462.0-26.089.689.6
UDH31046,3311,5324,04367.0-44.086.586.5
UDH31056,3311,5324,04360.0-52.595.495.4
UDH31066,3311,5324,04362.5-63.5260.1260.1
UDH31076,3101,5374,04266.04.0111.0111.0
UDH31086,3101,5374,04165.0-1.0113.7113.7
UDH31096,3101,5374,04175.0-13.0101.9101.9
UDH31106,3101,5374,04170.0-20.595.995.9
UDH31116,3101,5374,04073.5-30.595.895.8
UDH31126,3091,5374,04086.5-43.595.795.7
UDH31136,3101,5374,04077.0-53.098.598.5
UDH31146,3101,5374,04072.0-64.0110.1110.1
UDH31156,3101,5374,04182.5-10.0107.8107.8
UDH31166,3101,5374,04185.0-3.0111.2111.2
UDH31176,3091,5374,04178.5-2.0102.2102.2
UDH31186,3101,5374,04274.04.0113.9113.9
UDH31196,0841,3913,95548.0-26.0266.6266.6
UDH3119A6,0841,3913,95557.6-19.8209.8209.8
UDH31646,3091,5374,04190.52.5119.5119.5
UDH31656,3091,5384,04190.0-8.0111.5111.5
UDH31666,3101,5374,04181.0-24.096.096.0
UDH31716,3731,5194,044347.0-48.095.795.7
UDH31726,3721,5204,04415.7-50.1116.8116.8
UDH31746,3721,5204,04425.0-54.095.795.7
UDH3176A6,3711,5204,04466.0-84.0102.0102.0
UDH31776,3691,5214,044122.0-83.0105.0105.0
UDH31786,3691,5214,044111.0-72.0102.0102.0
UDH31806,4001,3964,05498.0-40.0170.5170.5
UDH3184A6,4001,3964,05486.5-36.0194.2194.2
UDH31866,3961,3954,05577.0-41.0205.1205.1
UDH31886,4011,3964,05470.0-32.0196.2196.2
Underground Diamond Drilling outside of Swan Mineral Reserves
UDE175A5,5531,4464,44790.8-84.91,071.0422.9
UDE181A5,6811,4034,42892.8-79.71,140.0769.0
UDE1845,8311,3504,404100.5-74.31,142.81,142.8
UDE184A5,8311,3504,404100.5-74.31,038.0587.1
UDE184B5,8311,3504,404100.5-74.3813.0521.6
UDE184C5,8311,3504,404100.5-74.3782.025.0
UDE185A5,8301,3504,404104.9-79.21,105.3616.2
UDE1956,1741,8544,246240.8-71.4670.0670.0
UDE1995,9561,3064,383105.1-71.31,011.51,011.5
UDE2005,9561,3064,383102.9-68.4987.0987.0
UDE200A5,9561,3064,383102.9-68.4761.986.1
UDE2015,9561,3064,383109.4-78.91,128.11,128.1
UDE2036,0811,2884,36290.9-58.5836.8836.8
UDE2046,0811,2884,36294.4-61.4846.0846.0
UDE2056,0821,2854,36298.0-66.2852.1852.1
UDE2066,0821,2854,36299.4-71.2861.1861.1
UDE2076,0811,2864,362102.0-78.51,106.11,106.1
UDE2085,9561,3114,38383.7-65.0900.0900.0
UDE2095,9561,3064,38388.2-67.5903.0903.0
UDE2105,9561,3064,38386.5-70.7951.2951.2
UDE2115,9561,3064,38384.0-75.21,004.71,004.7
UDE212A5,5531,4464,44793.9-84.31,113.0147.0
UDE2435,8301,3554,40477.6-45.1677.6677.6
UDE2456,5591,4824,04695.5-21.3330.0330.0
UDE2466,5591,4824,045103.9-35.7350.9350.9
UDE2476,5601,4824,045103.7-48.0356.9356.9
UDE2486,5601,4824,045104.1-61.3686.6686.6
UDE2496,5821,4714,046118.2-67.0452.9452.9
UDE2506,5821,4714,046126.9-74.4502.4502.4
UDE2586,8021,4424,170109.2-36.1317.9317.9
UDE2596,8021,4424,169111.6-46.5447.0447.0
UDE2606,8021,4424,169110.9-54.3456.3456.3
UDE2616,8021,4424,169113.0-64.2445.0445.0
UDE2626,8021,4424,169107.5-59.6443.7443.7
UDE2636,8011,4414,169119.8-70.6551.9551.9
UDE2656,0811,2884,36289.2-54.9905.7905.7
UDE2806,5831,4714,04664.3-67.1494.9494.9
UDE2826,8011,4424,170128.2-34.0416.9416.9
UDE282A6,8011,4424,170128.2-34.0377.642.7
UDH24826,2341,3394,194100.0-27.0428.9428.9
UDH24896,2261,3414,195101.0-49.0411.0411.0
UDH28316,3541,4064,19373.0-29.4396.0396.0
UDH28866,4441,3174,06099.7-20.8424.8424.8
UDH28876,4441,3174,06095.8-40.0501.0501.0
UDH29316,4631,6904,08513.9-84.5119.9119.9
UDH29326,4641,6914,08586.4-41.574.674.6
UDH29336,4631,6904,085123.0-67.9113.7113.7
UDH29896,5021,6564,086235.1-6.392.992.9
UDH30686,3471,5284,04452.5-34.0236.4236.4
UDH30946,2271,3414,19588.0-26.0492.1492.1
UDH31206,0831,3913,95556.5-25.7248.0248.0
UDH31226,0831,3913,95561.2-33.1368.9368.9
UDH31236,0841,3913,95544.5-29.2257.9257.9
UDH31246,0831,3913,95558.0-41.0260.6260.6
UDH31266,0461,3663,94966.1-18.5286.2286.2
UDH31276,0461,3663,94965.0-22.8281.6281.6
UDH31286,0461,3663,94958.6-33.5269.3269.3
UDH31296,0461,3663,94966.0-33.5253.9253.9
UDH31306,0461,3663,94865.3-38.3254.2254.2
UDH31316,0461,3653,94964.3-12.9290.1290.1
UDH31326,0461,3663,94970.0-14.6295.0295.0
UDH3133A6,0461,3663,95070.0-9.0314.6314.6
UDH31346,0461,3663,95064.9-8.0320.3320.3
UDH31356,0141,3733,94462.1-23.3283.0283.0
UDH31366,0141,3733,94469.4-23.9280.4280.4
UDH31376,0141,3723,94457.9-25.4278.7278.7
UDH31386,0141,3733,94366.6-27.8257.8257.8
UDH31396,0141,3733,94367.1-32.9277.2277.2
UDH31406,0141,3733,94361.5-37.4257.5257.5
UDH31416,0141,3733,94364.2-41.9251.5251.5
UDH31426,0141,3733,94464.7-19.9284.6284.6
UDH31436,0141,3733,94469.0-15.0299.6299.6
UDH31455,9921,3953,94065.1-29.6269.7269.7
UDH31465,9911,3953,94073.0-30.6270.0270.0
UDH31485,9911,3953,94068.3-36.0257.0257.0
UDH3148A5,9911,3953,94074.0-31.1240.054.3
UDH31495,9911,3953,94077.2-35.1270.0270.0
UDH3149A5,9911,3953,94072.0-40.0275.8275.8
UDH31505,9921,3953,93961.0-39.8257.7257.7
UDH31515,9911,3953,93968.0-43.0257.8257.8
UDH31535,9921,3943,93962.0-47.0254.7254.7
UDH31545,9911,3953,93974.0-48.0260.5260.5
UDH31565,9911,3953,94068.0-23.5279.0279.0
UDH31636,8011,4424,169123.1-59.0391.5391.5
UDH31796,4001,3964,05492.7-47.9224.4224.4
UDH31826,3951,3954,05580.0-41.0203.9203.9
UDH31836,4011,3964,05480.0-48.0149.4149.4
UDH32036,8031,4434,169123.0-51.0366.1366.1
UDH32286,0141,3733,94363.0-29.0278.4278.4


Primary Logo

Figure 1

Location Map – Fosterville Gold Mine
Figure 2

Lower Phoenix System
Figure 3

Swan South Mineralization
Figure 4

Swan Footwall Splay Mineralization
Figure 5

Swan Reserve Mineralization
Figure 6

Cross Section, Lower Phoenix and Cygnet
Figure 7

Cygnet, Pen & Cob Fault Mineralization

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok