Moneta Intercepts 0.70 m @ 30.20 g/t Gold, 0.76 m @ 26.60 g/t Gold, and 2.40 m @ 10.06 g/t Gold at South West

2018-05-24 / @newswire

 

Symbol: TSX: ME

TORONTO, May 24, 2018 /CNW/ - Moneta Porcupine Mines Inc. (TSX:ME) (OTC:MPUCF) (XETRA:MOP) ("Moneta" or the "Company") is pleased to announce the results from seven additional diamond drill holes completed on the South West Deposit ("South West") located within the Company's Golden Highway Project (located 110 km east of Timmins, Ontario, see Figure 1).

Moneta Porcupine Mines Inc. (CNW Group/Moneta Porcupine Mines Inc.)

Highlights:

Step-out drilling at South West has continued to extend the strike and depth extent of the vein structures, and two of the mineralized shoots, SW-1 and SW-2. One new vein, Redwood has been confirmed increasing the total number of veins to sixteen plus three new shoots modelled confirming a total of eight.

Vein array

Redwood Vein

Drill hole MGH17-076 confirmed the new Redwood vein east of Spruce intersecting 3.30 metres ("m") @ 7.60 grams per tonne gold ("g/t Au") including 2.40 m @ 10.06 g/t Au




Spruce Vein

Spruce was intersected in MGH17-076 returning 0.70 m @ 30.20 g/t Au and in hole MGH17-077 assaying 3.70 m @ 5.17 g/t Au     




Maple Vein

Drill hole MGH17-075 intersected 1.31 m @ 7.46 g/t Au and hole MGH17-076 extended the depth extent of this vein by 100 m with an intercept of 0.60m @ 10.55 g/t Au




Alder Vein

MGH17-079 intersected Adler extending the vein by 50 m to the south and over 100 m to depth returning 1.30 m @ 16.21 g/t Au including 0.76 m @ 26.60 g/t Au




Balsam Vein

Drill hole MGH17-076 intersected 4.00 m @ 3.77 including 1.0 m @ 6.33 g/t Au, extending Balsam to depth by ~100m




Cedar Vein

Drill hole MGH17-079 intersected 1.16 m @ 6.10 g/t Au confirming the near surface extensions of Cedar

 

Mineralized Shoots

  • SW-1: Drill hole MGH17-076 intersected 9.50 m @ 2.48 g/t Au and 15.05 m @ 1.67 g/t Au confirming the shallow extensions of this shoot by 25 m

  • SW-3: Geological modelling of SW-3 has confirmed four distinct bodies; SW-3a, SW-3b, SW-3c and SW-3d

Gary O'Connor, CEO & Chief Geologist commented, "We are very pleased as we continue to expand the footprint of gold mineralization intersecting new veins and confirming three new shoots in the South West area. Step-out drilling continued to extend the strike of the veins to the south and has extended the veins to depth. New drilling and interpretation has connected the central and eastern Banded Iron Formation units opening a large new area for potential mineralization. We continue to be very encouraged by the new results and have expanded the drill program at South West to continue to test the gold system, increase the number of veins and shoots, and confirm the higher grade mineralization."    

The latest assay results are from seven drill holes totalling 4,245.0 m of drilling at South West testing higher grade structural targets. The ongoing drill program at South West follows up on the previously announced exploration drill program undertaken by the Company in late 2017 on the Golden Highway Project and has been expanded to 41,100 m in 70 drill holes. Assays for additional drill holes are pending and will be released as they become available.

South West Deposit
Drilling to date at South West has been successful in confirming the existence of sixteen stacked veins and eight mineralized shoots. The veins trend NW as stacked veins, steeply dipping to the SW at 70°, and occur south of the Banded Iron Formation ("BIF") within clastic Timiskaming age sediments. A new vein, Redwood (the sixteenth identified to date) was confirmed in the current drilling. The modelled veins have an average width of approximately 2.90 m and are spaced 25 m to 30 m apart. The veins can be traced for up to 350 m strike length, have been historically drilled to 1,200 m depth and remain open but appear to narrow to the south.

The sheared contact with the BIF hosts mineralized stockwork zones ("shoots") which plunge ~65° to ~75° to the west and occur up to 50 m long, 25 m wide and have been confirmed to depths of over 800 m. Three new shoots have now been modelled at SW-3 bringing the total to eight.

The veins and stock-work style veining within the shoots occur as quartz-carbonate-pyrite veins within an ankerite alteration halo occasionally associated with sericite. A zone of pyrite-chlorite and quartz veinlets occur within the vein corridor and also hosts mineralization. The veins can be brecciated and occur as quartz matrix supported breccia zones. The eight mineralized shoots and sixteen vein corridors have now been successfully traced over a strike length of up to 1,200 m.

South West Drill Results
Drill hole MGH17-076 was drilled to test shallow up dip and southern extensions of the SW-1 and SW-2 mineralized shoots and the six modelled veins plus the extensions of the Maple, Oak, and Alder vein set at depth below hole MGH17-075. The hole intersected the Elm, Birch, Balsam (4.00 m @ 3.77 g/t Au), Cedar (1.02 m @ 4.48 g/t Au), Pine and Spruce (0.70 m @ 30.20 g/t Au) veins. The hole intersected a new vein located below Spruce, the Redwood vein (3.30 m @ 7.60 g/t Au, including 2.40 m @ 10.06 g/t Au). The Redwood vein was also intersected in hole MGH17-075 (3.08 m @ 3.99 g/t Au). The hole also intersected the Maple (0.60 m @ 10.55 g/t Au), and the Oak and Alder veins extending the depth extensions of these veins by up to 100 m and the strike extent by 50 m to the south. The SW-1 shoot (9.50 m @ 2.48 g/t Au and 15.05 m @ 1.67 g/t Au) and the SW-2 shoot were also intersected confirming southern (~25 m) extensions as well as near surface continuity.

Drill hole MGH17-074 was drilled to test the contacts along the extensions of the BIF between the South West Central and East blocks and test the northern and depth extensions of the Willow, Arbutus, Yew and Larch veins at depth. The hole drilled between shoots and intersected EB-3 (0.71 m @ 8.09 g/t Au) which is not being modelled and the Willow vein corridor which extended the vein by 75 m to the north. A new vein was intersected at 420.00 m and returned 1.00 m @ 4.38 g/t Au. The hole has confirmed the new folded interpretation of the BIF.

Drill holes MGH17-077, MGH17-079 and MGH17-080 were all drilled to test the strike extensions by over 100 m to the south as well as the depth extensions by up to 200 m of the six original modelled veins and the Maple, Oak, Alder and Larch veins. Hole MGH17-079 intersected the Cedar vein at 71.65 m assaying 1.16 m @ 6.10 g/t Au and intersected the Alder vein at 414.75 m and returned 1.30 m @ 16.21 g/t Au including 0.76 m @ 26.60 g/t Au. Drill hole MGH17-077 intersected the Spruce vein at 527.30 m and assayed 2.90 m @ 6.12 g/t Au and the Maple vein at 611.00 m which returned 1.00 m @ 5.29 g/t Au extending Spruce by 50 m and Maple by nearly 200 m.  These represent ~100 m step-outs to the south. MGH17-080 also confirmed the Oak (1.02 m @ 3.03 g/t Au), Maple and Alder veins by over 100 m to the south.

Hole MGH17-019x was drilled as an extension to test the northern contact of the main BIF unit and potential extensions of the main veins. The hole intersected BIF units on both sides of the gabbro intrusive dyke.

Drill hole MGH17-078 was drilled to test the southern and depth extensions of the west and six main veins. The hole intersected the West, Tamarack and Elm vein structures and returned assays of up to 1.26 m @ 2.66 g/t Au from the west vein. Deeper targets were not intersected due to deviation of the hole.

Please click here for Figure 1: South West Location Map- Golden Highway Project:
http://www.monetaporcupine.com/i/misc/2018-05-24_NR-Fig1.jpg

 Table 1: South West: Selective Significant Drill Results

Hole

From

To

Length

Au

Vein

#

(m)

(m)

(m)

(g/t)

Name

MGH17-074

420.00

421.00

1.00

4.38

New

MGH17-074

455.00

457.00

2.00

2.62

New

MGH17-074

566.98

567.69

0.71

8.09

EB-3

MGH17-074

579.25

580.25

1.00

2.37

New

MGH17-076

220.50

230.00

9.50

2.48

SW-1

includes

225.00

229.00

4.00

3.77

Balsam

includes

227.00

228.00

1.00

6.33

Balsam

MGH17-076

239.95

255.00

15.05

1.67*

SW-1

includes

239.95

241.90

1.95

2.33

SW-1 

and

249.80

251.05

1.25

3.65

 SW-1

MGH17-076

267.80

268.82

1.02

4.48

Cedar

MGH17-076

372.60

373.30

0.70

30.20

Spruce

MGH17-076

429.00

432.30

3.30

7.60

Redwood

includes

429.00

430.76

2.40

10.06

 Redwood

includes

430.07

430.76

0.69

15.00

 Redwood

MGH17-076

456.00

456.60

0.60

10.55

Maple

MGH17-077

527.30

531.00

3.70

5.17

Spruce

includes

527.30

530.20

2.90

6.12

Spruce 

MGH17-077

610.00

611.00

1.00

5.29

Maple

MGH17-078

252.54

253.80

1.26

2.66

West vein

MGH17-079

71.65

72.81

1.16

6.10

Cedar

MGH17-079

414.75

416.05

1.30

16.21

Alder

includes

415.29

416.05

0.76

26.60

Alder

MGH17-080

379.48

380.50

1.02

3.03

Oak

 

Intercepts are calculated using a 2.0 g/t Au cut-off, maximum of 2m internal waste and no top cap. All intercepts are reported as drill widths and thought to be 65% to 100% of true widths.

Table 2: Drill Hole Details

Hole

Easting

Northing

Elevation

Azimuth

Inclination

Depth

#

mE

mN

masl

°

°

m

MGH17-019x*

570,571

5,369,833

325

90

-55

879.00

MGH17-074

570,888

5,369,594

323

90

-55

714.00

MGH17-076

570,850

5,369,412

323

90

-50

627.00

MGH17-077

571,007

5,369,214

324

90

-50

660.00

MGH17-078

570,750

5,369,098

324

90

-56

735.00

MGH17-079

571,200

5,369,397

324

90

-55

501.00

MGH17-080

571,209

5,369,335

325

90

-55

501.00

 

*372.0 m extension

Please click here for Figure 2: South West: Geology and Drill Location Map:
http://www.monetaporcupine.com/i/misc/2018-05-24_NR-Fig2.jpg

Please click here for Figure 3: South West: Schematic Cross Section:
http://www.monetaporcupine.com/i/misc/2018-05-24_NR-Fig3.jpg

QA/QC Procedures
All core drilling conducted by Moneta is oriented. Drill core is sawn and half is sent ALS Canada Inc. for drying and crushing to -2 mm, with a 1.00 kg split pulverized to -75 µm (200#). A 50 g charge is Fire Assayed and analyzed using a AAS finish for Gold. Samples above 10.00 g/t Au are analyzed by Fire Assay with a gravimetric finish and selected samples with visible gold or high-grade mineralization are assayed by Metallic Screen Fire Assay on a 1.00 kg sample. Moneta inserts independent certified reference material and blanks with the samples and assays routine pulp repeats and coarse reject sample duplicates with the samples, as well as completing third-party check assays at Activation Laboratories Ltd. Gary O'Connor, MAusIMM is a qualified person under NI 43-101 and has reviewed and approved the contents of this press release.  

About Moneta
The Company holds a 100% interest in 5 core gold projects strategically located along the Destor-Porcupine Fault Zone in the Timmins Gold Camp with over 85 million ounces of past gold production. The projects consist of the Golden Highway, North Tisdale, Nighthawk Lake, Kayorum and Denton projects. The Golden Highway Project covers 12 kilometres of prospective ultramafic/mafic volcanic/sedimentary rocks along the DPFZ hosting a NI 43-101 indicated resource estimate of 1,091,000 ounces (31.1 Mt at 1.09 g/t Au) and 3,204,000 ounces inferred (83.3 Mt at 1.20 g/t Au), clustered within four kilometres.

The Company's public documents may be accessed at www.sedar.com. For further information on the Company, please visit our website at www.monetaporcupine.com or email us at info@monetaporcupine.com.

This news release includes certain forward-looking information and forward-looking statements, collectively "forward-looking statements" within the meaning of applicable Canadian securities legislation. Forward-looking statements are frequently identified by such words as "may", "will", "plan", "expect", "anticipate", "estimate", "intend" and similar words referring to future events and results. Forward-looking statements include, but are not limited to information with respect to the future performance of the business, its operations and financial performance and condition such as the Company's drilling program and the timing and results thereof; and the ability of the Company to finance and carry out its anticipated goals and objectives.

Forward-looking statements are based on the current opinions and expectations of management. All forward-looking information is inherently uncertain and subject to a variety of assumptions, risks and uncertainties, including the speculative nature of mineral exploration and development, fluctuating commodity prices, competitive risks and the availability of financing, as described in more detail in our recent securities filings available at www.sedar.com. Actual events or results may differ materially from those projected in the forward looking-statements and we caution against placing undue reliance thereon. We assume no obligation to revise or update these forward-looking statements.

SOURCE Moneta Porcupine Mines Inc.

View original content with multimedia: http://www.newswire.ca/en/releases/archive/May2018/24/c4641.html

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok