Multiple Holes Yield Silver-Tin Polymetallic Intercepts in the Santa Barbara and Central Breccia Pipes at Eloro Resources' Iska Iska Project, Bolivia

 

• Hole DSB-08 in the Santa Barbara Breccia Pipe returned 69.89 g Ag eq/t over 252.89m including 196.60 g Ag eq/t with 131.13 g Ag/t over 14.52m
  
• Hole DSB-10 returned 29 reportable mineralized intercepts over its entire 1 km length including 114.96 g Ag eq/t over 56.12m and 80.71 g Ag eq/t over 74.39m

TORONTO, July 06, 2021 (GLOBE NEWSWIRE) -- Eloro Resources Ltd. (TSX-V: ELO; OTCQX: ELRRF FSE: P2QM) (“Eloro”, or the “Company”) is pleased to provide an update on its Iska Iska silver-tin polymetallic project in Potosi Department, southern Bolivia. To date, the Company has completed 43 diamond drill holes totalling 20,030 metres (m) to test major target areas at Iska Iska. This press release reports drilling results from four (4) additional holes which tested the Santa Barbara Breccia Pipe (“SBBP”) and Central Breccia Pipe (“CBP”). To date, every drill hole that has been assayed has returned multiple reportable mineralized intercepts. Currently three drill rigs are in operation at Iska Iska. One surface drill rig is completing first pass drilling of the CBP from the northern radial platform and a second surface drill is testing the major Porco (South) Target. The third drill, an underground rig, is testing the northeast part of SBBP and its mineralized envelope. Figure 1 is a geological plan map showing locations of drill holes and an updated geological interpretation. Figure 2 is a more detailed geological plan map of the SBBP and CBP areas. Figure 3 is a NW-SE geological section along the northwestern part of the CBP and the eastern part of SBBP showing locations of the main mineralized zone and of drill holes DSB-08, DSB-10 and DCN-2 in this release. Figure 4 shows the currently interpreted metal zoning pattern on this same section. Table 1 provides significant drilling results and Table 2 lists holes completed with assays pending as well as holes in progress in the three major target areas. Highlights are as follows:

Highlights:

• Hole DSB-08, testing the northeast quadrant of the SBBP, encountered eighteen reportable mineralized intercepts beginning near surface to its terminus at 614.4 m. The longest intercept was 69.89 g Ag eq/t over 252.89m from 355.12 to 608.02m including several higher-grade sections of 196.60 g Ag eq/t including 131.13 g Ag/t over 14.52m, 134.62 g Ag eq/t including 93.25 g Ag/t over 21.08m and 145.35 g Ag eq/t including 2.38% Zn over 10.11m.
• Hole DSB-10, testing the southwest quadrant of the SBBP and northern part of the CBP, encountered twenty-nine reportable mineralized intercepts beginning near surface to its terminus at 1,019.4m. Tin was notably elevated in many intervals suggesting proximity to a mineralizing intrusive source in this area. Notable intercepts include 114.96 Ag eq/t including 0.325% tin (Sn) over 56.2m from 322.18m to 378.30m including a higher-grade section of 187.98 g Ag eq/t including 0.535% Sn over 28.86m, 80.71 g Ag eq/t including 0.213% Sn over 74.39m from 474.86 to 549.25m and 118.69 g Ag eq/t over 10.77m from 829.97 to 840.74m.

Dr. Bill Pearson, P.Geo., Eloro’s Executive Vice President Exploration, stated: “We are continuing with our strategy of completing first pass drilling from both surface and underground to test major target areas of the SBBP, CBP and Porco (South). Targets drilled to date cover an area 2km long by 1.2km wide with additional targets further east in the caldera complex still to be tested, as shown in Figure 1. All holes drilled to date have intersected significant mineralization and it is becoming clearly evident that the Iska Iska mineralizing system is zoned both laterally and vertically. Mineralization at SBBP is more intermediate style polymetallic Ag-Zn-Pb-Sn, whereas recent results from the CBP suggest a deeper level higher temperature tin-dominant system. We are currently carrying out a down-hole induced polarization (IP) survey which will aid in determining the distribution of mineralization especially potential higher-grade areas which tend to have more sulphides. Currently we have approximately 2,600 samples in the laboratory pending analysis. ALS Global in Lima, Peru has advised us that they are gradually returning their operations to a more normal basis as the COVID-19 situation improves.  The backlog of samples has now been stabilized and they anticipate that in the next 4-6 weeks the sample back log will be significantly reduced allowing the laboratory to return to more normal turnaround times.  The preparation facility in Oruro continues to operate at normal compacity.”

Dr. Osvaldo Arce, P. Geo., General Manager of Eloro’s Bolivian subsidiary, Minera Tupiza S.R.L. and an expert on the geology of Bolivian mineral deposits said: “Diamond drilling at Iska Iska to date allows us to define a preliminary lateral and vertical metal zoning model in this large km-scale mineralized polymetallic system. This zoning is from a higher temperature core characterized by Sn moving outward to Sn (W-Au-Bi), Sn-Ag (Bi), Ag−Zn-Pb-(Sn-Au-Cu), and finally Zn-Pb-Au. These zones are arranged according to a decrease of temperature of deposition and increasing distance from the presumed heat source that is likely a Sn porphyry at depth. Mineralization can be telescoped depending on the geochemical environment, the character of metal-forming solutions and the extent of subsequent structural overprinting and remobilization. Remobilization is likely responsible for producing significant areas of high-grade mineralization within the more extensive lower grade envelope.”

Dr. Arce continued: “Drill hole DSB-10, drilled in the SBBP and crossing into the CBP at depth, intersected primarily tin mineralization corresponding to the highest temperature and deeper part of the mineralizing system. The tin intersections have local silver and gold values that likely belong to the edge of a higher-level epithermal event. The strong tin mineralization is widely distributed in this hole with the best intersection being 0.325% Sn over 56.2m which included a 28.86m section grading 0.535% Sn. Although not continuous a total of 211.34m cumulative intersections of Sn mineralization were obtained in the lower part of hole DSB-10 collectively grading 0.22% Sn (102.27 Ag eq/t). These higher-grade intersections have a distinctive alteration of tourmaline, silicification and jarosite within a much broader pervasive alteration of tourmaline and silicification with anomalous values of Sn. These grades of tin are comparable to grades reported for other well-known tin deposits in Bolivia including Llallagua, Huanuni and Chorolque."

Finally, Dr. Arce noted that: “Hole DPC-01, the first hole drilled in the Porco target zone, intersected 767 meters of an intercalation of mineralized granodiorite and intrusion breccia with aphanitic dacite and sandstone clasts which confirmed that Porco is likely a major breccia pipe. The last 72m of this hole intersected medium to coarse granodiorite which is still mineralized. Mineralization in this hole is related to breccia veins, veins and veinlets of pyrite, cassiterite, tourmaline, chalcopyrite, sphalerite, galena, pyrrhotite, siderite and alunite collectively up to 7%. Assays on this hole are pending but the potential metal contents appear to be more comparable to the higher level SBBP than the deeper level CBP. As previously reported (March 29, 2021), channel sampling of the Porco adit located approximately 200m to the south of the Porco breccia pipe target (Figure 1) returned a 50m strike length averaging 519.35 g Ag eq/t (236.13 g Ag/t, 1.89g Au/t, 0.2% Bi, 0.87% Cu, 0.31% Pb and 0.055% Sn) over an average channel width of 2.5m supporting this conclusion.”

Dr. Quinton Hennigh, Senior Technical Advisor to Eloro commented: “Every hole drilled at Iska Iska to date has encountered multiple mineralized intercepts. Porco, the most recently tested target, is yielding visible indications of long mineralized intercepts. Even though we have now drilled numerous holes within an area 2km north-south and 1.2km east-west, we have yet to find the ultimate limits of this immense system. Every hole displays hydrothermal alteration and zones of mineralization. While it is becoming clear that mineral zonation is present within this huge system, there is still a lot of work to do to fully determine such patterns. It is entirely possible that there are multiple magmatic drivers within this immense complex. It is truly exciting to see continued discovery with every hole that is completed.”

Table 1: Significant Diamond Drilling Results, Iska Iska, as at July 5, 2021.
https://www.globenewswire.com/NewsRoom/AttachmentNg/ebd3df4f-fd1a-473e-8e9f-343d82ab1244

Note: True width of the mineralization is not known at the present time, but based on the current understanding of the relationship between drill orientation/inclination and the mineralization within the breccia pipes and the host rocks such as sandstones and dacites, it is estimated that true width ranges between 70% and 90% of the down hole interval length but this will be confirmed by further drilling. Percentage metal contents are shown for each element.

Metal prices and conversion factors used for calculation of g Ag eq/t (grams Ag per grams x metal ratio) are as follows:

Element	Price (per kg)		Ratio to Ag
Ag	$875.00		1.00000
Sn	$28.00		0.03200
Zn	$2.80		0.00320
Pb	$2.10		0.00240
Au	$57,400		65.6000
Cu	$8.80		0.01006
Bi	$12.76		0.01458
In	$305.00		0.34857
Cd	$5.50		0.00629

In calculating the intersections reported in this press release a sample cutoff of 30 g Ag eq/t was used with generally a maximum dilution of 3 continuous samples below cutoff included within a mineralized section unless more dilution is justified geologically.

Table 2: Summary of Diamond Drill Holes Completed with Assays Pending and Drill Holes in Progress at Iska Iska from press release of July 6, 2021.

Hole No.	Type	Collar Easting	Collar Northing	Elev	Azimuth	Angle	Hole Length m
Underground Drilling Huayra Kasa – Santa Barbara Area
DHK-18	UG	205421.2	7656358.7	4152.6	180	-10	446.45
DHK-19	UG	205422.7	7656359.8	4151.6	145	-45	329.80
DHK-20	UG	205421.2	7656359.2	4151.4	180	-50	350.80
DHK-21	UG	205418.5	7656360.0	4151.9	235	-70	512.90
DHK-22	UG	205418.5	7656360.0	4151.9	210	-60	600.00
						Subtotal	2,239.95
DHK-23	UG	205418.5	7656360.0	4151.9	270	-50	In progress
Santa Barbara Breccia Pipe - Surface Radial Drilling from Centre
DSB-11	S	205118.88	7656205.7	4356.0	125	-40	665.30
						Subtotal	665.30
Central Breccia Pipe – Surface Radial Drill Program – North Setup
DCN-03	S	204902.0	7655860.0	4420.0	135	-60	464.50
DCN-04	S	204902.0	7655860.0	4420.0	0	-80	851.40
DCN-05	S	204902.0	7655860.0	4420.0	90	-60	524.30
DCN-06	S	204902.0	7655860.0	4420.0	180	-80	626.40
						Subtotal	2,466.60
DCN-07	S	204902.0	7655860.0	4420.0	270	-60	In progress
Central Breccia Pipe – Surface Radial Drill Program – South Setup
DCS-01	S	204852.0	7655612.8	4429.6	90	-60	1,007.50
DCS-02	S	204852.3	7655612.4	4429.6	135	-60	800.50
DCS-03	S	204852.1	7655612.3	4429.7	225	-60	443.50
						Subtotal	2251.50
Porco Central – Surface Radial Drill Program
DPC-01	S	205457.2	7655110.9	4175.0	270	-60	767.50
						Subtotal	767.50
DPC-02	S	205457.2	7655110.9	4175.0	225	-60	In progress
						TOTAL	8,390.85

S = Surface UG=Underground; collar coordinates in metres; azimuth and dip in degrees
Total drilling completed since the start of the program on September 13, 2020 is 20,030m in 43 holes (17 underground holes and 26 surface holes) with one underground and two surface holes in progress.

Qualified Person

Dr. Osvaldo Arce, P. Geo., General Manager of Eloro’s Bolivian subsidiary, Minera Tupiza S.R.L., and a Qualified Person in the context of National Instrument 43-101 (“NI 43-101”), has reviewed and approved the technical content of this news release.   Dr. Bill Pearson, P.Geo., Executive Vice President Exploration Eloro, and who has more than 45 years of worldwide mining exploration experience including extensive work in South America, manages the overall technical program working closely with Dr. Arce. Dr. Quinton Hennigh, P.Geo., Senior Technical Advisor to Eloro and Independent Technical Advisor, Mr. Charley Murahwi P. Geo., FAusIMM of Micon International Limited are regularly consulted on technical aspects of the project.

Drill samples are prepared in ALS Bolivia Ltda’s preparation facility in Oruro, Bolivia with pulps sent to the main ALS Global laboratory in Lima for analysis, As announced in the February 26, 2021 press release, Eloro has changed the assay protocol to utilize X-ray fluorescence (XRF) to more accurately analyze higher Sn. Tin in the CBP is suspected to occur as cassiterite which is insoluble in acid digestion, and therefore not suited for wet chemical techniques. In addition, other assay protocols have been changed to provide for a more accurate measurement of the wide-ranging suite of polymetallic metals at Iska Iska. Eloro employs an industry standard QA/QC program with standards, blanks and duplicates inserted into each batch of samples analyzed with selected check samples sent to a separate accredited laboratory.

Unfortunately, the ALS Global laboratory in Lima where the Iska Iska samples are being analyzed has had major delays in turnaround time due to the impact of the COVID-19 lockdown of Lima by the Peruvian government. This has restricted availability of critical supplies necessary to carry out analytical work. As a result, there will be delays in reporting of assay results.

About Iska Iska

Iska Iska silver-tin polymetallic project is a road accessible, royalty-free property, wholly-controlled by the Title Holder, Empresa Minera Villegas S.R.L. and is located 48 km north of Tupiza city, in the Sud Chichas Province of the Department of Potosi in southern Bolivia. Eloro has an option to earn a 99% interest in Iska Iska.

Iska Iska is a major silver-tin polymetallic porphyry-epithermal complex associated with a Miocene possibly collapsed/resurgent caldera, emplaced on Ordovician age rocks with major breccia pipes, dacitic domes and hydrothermal breccias. The caldera is 1.6km by 1.8km in dimension with a vertical extent of at least 1km. Mineralization age is similar to Cerro Rico de Potosí and other major deposits such as San Vicente, Chorolque, Tasna and Tatasi located in the same geological trend.

Eloro began underground diamond drilling from the Huayra Kasa underground workings at Iska Iska on September 13, 2020. On November 18, 2020 Eloro announced the discovery of a significant breccia pipe with extensive silver polymetallic mineralization just east of the Huayra Kasa underground workings and a high-grade gold-bismuth zone in the underground workings. On November 24, 2020, Eloro announced the discovery of the Santa Barbara Breccia Pipe (“SBBP”) approximately 150m southwest of the Huayra Kasa underground workings.

Subsequently, on January 26, 2021, Eloro announced significant results from the first drilling at the SBBP including the discovery hole DHK-15 which returned 129.60 g Ag eq/t over 257.5m (29.53g Ag/t, 0.078g Au/t, 1.45%Zn, 0.59%Pb, 0.080%Cu, 0.056%Sn, 0.0022%In and 0.0064% Bi from 0.0m to 257.5m. Subsequent drilling has confirmed significant values of Ag-Sn polymetallic mineralization in the SBBP and the adjacent Central Breccia Pipe (“CBP”). The SBBP thus far extends 800m along strike by 400+m wide and extends to at least 700m depth. CBP extends for 700m along strike by 400+m wide and extends to at least 900m deep.

A substantive mineralized envelope which is open along strike and down-dip extends around the breccia pipes. Continuous channel sampling of the Santa Barbara Adit located to the east of SBBP returned 442 g Ag eq/t (164.96 gAg/t, 0.46%Sn, 3.46% Pb and 0.14% Cu) over 166m including 1,092 g Ag eq/t (446 g Ag/t, 9.03% Pb and 1.16% Sn) over 56.19m. The west end of the adit intersects the end of the SBBP.

On May 4, 2021, Eloro released results from the first drill hole on the CBP. Hole DCN-01 intersected multiple mineralized intercepts including 196.09 g Ag eq/t (150.25 g Ag/t, 0.10% Sn and 0.05 g Au/t) over 56.2m and containing 342.98 g Ag eq/t (274.0 g Ag/t, 0.16% Sn and 0.16 g Au/t) over 27.53m. Hole DSB-10, drilled from Santa Barbara Breccia Pipe platform, encountered over 500m of continuous sulphide mineralization in a position several hundred metres below mineralization encountered in hole DCN-01. Assays are pending. The target zone is more than 1km long by 800m wide, over 500m thick and open in all directions.

Geological mapping and satellite interpretation has located a third major breccia pipe target Porco (South) that is approximately 600m in diameter (South) located southeast of CBP in the southern part of the Iska Iska caldera complex. Previous channel sampling in the Porco adit located adjacent the target area 200m to the southeast returned 50m grading 519.35 g Ag eq/t including 236.13 g Ag/t, 1.89 g Au/t, 0.87% Cu, 0.22% Bi and >0.05% Sn over an average sample width of 2.49m.

Currently three diamond drill rigs are active at Iska Iska, two surface rigs and one underground drill. Planned drilling for 2021 is 51,000m with the aim of outlining an initial inferred NI 43-101 mineralization by late fall. A ground magnetic survey was recently completed over the property and an induced polarization survey will commence shortly to further define drill targets. Preliminary metallurgical tests are also in progress. An updated NI 43-101 Technical Report is being prepared by independent consultant Micon International Ltd.

About Eloro Resources Ltd.

Eloro is an exploration and mine development company with a portfolio of gold and base-metal properties in Bolivia, Peru and Quebec. Eloro has an option to acquire a 99% interest in the highly prospective Iska Iska Property, which can be classified as a polymetallic epithermal-porphyry complex, a significant mineral deposit type in the Potosi Department, in southern Bolivia. Eloro commissioned a NI 43-101 Technical Report on Iska Iska, which was completed by Micon International Limited and is available on Eloro’s website and under its filings on SEDAR. Iska Iska is a road-accessible, royalty-free property. Eloro also owns an 82% interest in the La Victoria Gold/Silver Project, located in the North-Central Mineral Belt of Peru some 50 km south of Barrick’s Lagunas Norte Gold Mine and Pan American Silver’s La Arena Gold Mine. La Victoria consists of eight mining concessions and eight mining claims encompassing approximately 89 square kilometres. La Victoria has good infrastructure with access to road, water and electricity and is located at an altitude that ranges from 3,150 m to 4,400 m above sea level.

For further information please contact either Thomas G. Larsen, Chairman and CEO or Jorge Estepa, Vice-President at (416) 868-9168.

Information in this news release may contain forward-looking information. Statements containing forward looking information express, as at the date of this news release, the Company’s plans, estimates, forecasts, projections, expectations, or beliefs as to future events or results and are believed to be reasonable based on information currently available to the Company. There can be no assurance that forward-looking statements will prove to be accurate. Actual results and future events could differ materially from those anticipated in such statements. Readers should not place undue reliance on forward-looking information.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release.

Figure 1: Geology of the Iska Iska Caldera Complex showing locations of Major Breccia Pipe targets and diamond drill holes.
https://www.globenewswire.com/NewsRoom/AttachmentNg/bbe63c9a-c90c-4915-b361-72dbfa10ea2b

Figure 2: Detailed Geological Plan Map of the Santa Barbara and Central Breccia Pipe areas showing locations of diamond drill holes.
https://www.globenewswire.com/NewsRoom/AttachmentNg/eec70115-e425-4175-98d8-9bd7b64ea3d6

Figure 3: SW-NE Geological Cross Section of the Central Breccia Pipe and Santa Barbara Breccia Pipe, Iska Iska Project
https://www.globenewswire.com/NewsRoom/AttachmentNg/a8e5dfe9-0d46-41e6-be22-707dc405ab06

Figure 4: SW-NE Geological Cross Section showing Metal Zonation of the Central Breccia Pipe and Santa Barbara Breccia Pipe, Iska Iska Project
https://www.globenewswire.com/NewsRoom/AttachmentNg/71af10d1-4d50-4ef3-807a-10f546253edb