Rupert Resources Drills 482g/t Gold Over 1m and 5.2 g/t Over 9.5m at Hein?? South Target, Area 1

2020-06-10 / @businesswire

 

Rupert Resources Ltd (“Rupert” or “the Company”) reports new drill results from its ongoing exploration programme at the 100% owned Pahtavaara Project in the Central Lapland Greenstone Belt, Finland.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20200610005375/en/

Figure 1 - Location of Heina South and five other discoveries made in Area 1 since April 2019 (Graphic: Business Wire)

Figure 1 - Location of Heina South and five other discoveries made in Area 1 since April 2019 (Graphic: Business Wire)

The Company has intersected gold mineralisation within a pyrite-quartz vein stockwork that is up to 20m wide and has a projected strike length from drilling to date of at least 400m. The mineralisation remains open to the north east, the west and at depth with latest IP geophysics suggesting an un-tested offset to the sulphide zone. Heinä South is located 1km north-west of the new Ikkari discovery where hole 120042 intersected 1.8g/t Au over 137m (see release dated May 12, 2020).

Highlights

The Heinä South target area is approximately 1km2 (figure 1) with a high concentration of base of till anomalies. Drilling to date has focused on the northern-most part of the prospect.

  1. Holes 120011 and 120033 intersected the highest grades and are 200m apart in the east and west of the target respectively. Hole 120011 intersected 5.2g/t Au over 9.5m from 39m including 40.7g/t Au over 1m and hole 120033 intersected 482g/t over 1m
  2. Hole 120007 intersected 5.6g/t Au over 2.6m from 53.6m, 10.4g/t Au over 2m from 84m, and 26.1g/t Au over 1.0m from 174m. The hole was drilled oblique to the anomaly but demonstrated early in the program the potential for scale.
  3. Hole 120031 intersected 2.6g/t Au over 12m from 83m, including 5.0g/t Au over 3m from 87m and Hole 120029 intersected 4m @ 3g/t Au and 2m @ 3.49g/t Au.

James Withall, CEO of Rupert Resources commented “The exploration drilling program at Area 1 has delivered some fantastic results from numerous targets. Heinä South, under up to 20m of cover has recorded the highest-grade intersection to date outside of our Pahtavaara mine. We have yet to test the full extent of the gold anomalism at this target with mineralisation identified in both a stockwork vein setting and within neighbouring intrusive rocks. The geology team continue to build up our inventory of close proximity targets at Area 1 that itself represents just a fraction of the almost 300km2 licence package.”

Summary

The 2019/20 regional exploration program has focussed on a series of targets in Area 1, which contains just 5km of a 20km prospective structure on the Company’s licence. Over 14,000m (80 holes) of diamond drilling has now been completed at Area 1. Table 1 highlights the best mineralised intercepts that have been drilled to date at the six discoveries since drilling commenced in April 2019.

Table 1. Reported intercepts >20g AuEq from Area 1

Hole ID

Prospect

From (m)

To (m)

Interval (m)

Au (g/t)

Cu (%)

120033

Heinä South

150.0

151.0

1.0

482.0

 

120042

Ikkari

10.8

148.0

137.2

1.8

 

120015

Island North

74.8

75.3

0.5

249.0

 

120038

Ikkari

25.0

79.0

54.0

1.5

 

119044

Heinä Central

49.0

96.0

47.0

1.0

0.4

119062

Heinä Central

84.0

94.6

10.6

3.3

1.5

120011

Heinä South

39.0

48.5

9.5

5.2

 

119049

Heinä Central

154.0

191.5

37.5

0.8

0.4

119054

Island North

103.0

105.0

2.0

15.1

 

120007

Heinä South

174.0

175.0

1.0

26.1

 

120031

Heinä South

83.0

95.0

12.0

2.0

 

120007

Heinä South

84.0

86.0

2.0

10.4

 

120031

Heinä South

87.0

90.0

3.0

6.6

 

Notes to table: No upper cut-off grade was applied. 0.5g/t lower cutoff applied to all prospects except Ikkari where 0.4g/t Au lower limit is applied. Unless specified, true widths cannot be accurately determined from the information available. Ranking based on gold price of USD1500/oz, copper price USD2.5/lb and 100% metallurgical recovery. New results in bold.

Heinä South

The Heinä South target was identified by a series of high-grade base of till anomalies (up to 11ppm Au) and very limited drilling in the spring of 2019 (Hole 119031, see release from May 21, 2019, target previously called Vuoma South). Access for further drilling was limited to the winter season due to the low-lying wet ground conditions.

The gold mineralisation occurs within deformed sediments at a contact zone with intrusive rock types which are also mineralised to some extent. Evidence from drilling, base of till anomalism, ground magnetics and induced polarisation (IP) geophysical surveys indicate a sub-vertical zone that strikes ENE and drilling to date has identified gold mineralisation to 160m vertical depth (figure 2). To the west, the IP anomaly appears to be offset to the north and a large section of the anomaly has not yet been drill tested.

Follow-up drilling at this target will occur when access is available later in the year to test extensions, parallel and offset structures, and the remaining base of till anomalies in the southern half of the prospect.

Mineralisation at the Heinä South prospect is covered with up to 10m of transported glacial till with restricted access in winter due to low lying wet ground conditions. Gold mineralisation is associated with multi-phase pyrite within quartz-pyrite and massive pyrite veins, as part of a stockwork of quartz-carbonate veins. Zones of massive pyrite contain the highest grades (up to 10 – 40g/t Au) with disseminated sulphides containing anomalous (<0.5g/t) gold. Early quartz-carbonate veins are overprinted by extensional veins that include coarse-grained pyrite and form sub-parallel trends, broadly related to lithological contacts between sediments and mafic-intermediate intrusives, although mineralisation also occurs within both lithologies.

About the Pahtavaara Project

The Pahtavaara Project is located in the heart of the Central Lapland Greenstone Belt, Northern Finland where the company owns the permitted Pahtavaara mine that is on active care & maintenance and within a contiguous licence package of almost 300km2. The Company acquired the project for just USD $2.5m in 2016 and is undertaking exploration both at the existing mine and across the region to demonstrate the potential for significant economic mineralisation.

Area 1 comprises a large part of a structural corridor that lies between Kittilä Group allocthon to the north and the younger Kumpu Group basin to the south. The zone is dominated by large E-W to ENE trending faults which have controlled broad to isoclinal folding within the sediment-dominated (Savukoski Group) rock package. A complex network of cross cutting structures has focused multi-stage fluid flow, with gold mineralisation associated with massive to fine-grained disseminated sulphides and concentrated at favourable structural intersections and fold hinges.

Review by Qualified Person, Quality Control and Reports

Mr. Mike Sutton, P.Geo. Director and Dr Charlotte Seabrook, MAIG, RPGeo. Exploration Manager, are the Qualified Persons as defined by National Instrument 43-101 responsible for the accuracy of scientific and technical information in this news release.

Samples are prepared by ALS Finland in Sodankylä and assayed in ALS laboratories in Ireland, Romania or Sweden. All samples are under watch from the drill site to the storage facility. Samples are assayed using fire assay method with aqua regia digest and analysis by AAS for gold. Over limit analysis for >10 ppm Au is conducted using fire assay and gravimetric finish for assays over >100ppm Au. For multi-element assays Ultra Trace Level Method by HF-HNO3-HClO4 acid digestion, HCl leach and a combination of ICP-MS and ICP-AES is used. The Company’s QA/QC program includes the regular insertion of blanks and standards into the sample shipments, as well as instructions for duplication. Standards, blanks and duplicates are inserted at appropriate intervals. Approximately five percent (5%) of the pulps and rejects are sent for check assaying at a second lab.

Base of till samples are prepared in ALS Sodankylä by dry-sieving method prep-41, and assayed by fire assay with ICP-AES finish for gold. Multi-elements are assayed in ALS laboratories in either of Ireland, Romania or Sweden by aqua regia with ICP-MS finish. Rupert maintains a strict chain of custody procedure to manage the handling of all samples. The Company’s QA/QC program includes the regular insertion of blanks and standards into the sample shipments, as well as instructions for duplication.

- Ends –

About Rupert

Rupert is a Canadian based gold exploration and development company that is listed on the TSX Venture Exchange under the symbol “RUP”. The Company owns the Pahtavaara gold mine, mill, and exploration permits and concessions located in the Central Lapland Greenstone Belt in Northern Finland (“Pahtavaara”). Pahtavaara previously produced over 420koz of gold and 474koz remains in an Inferred mineral resource (4.6 Mt at a grade of 3.2 g/t Au at a 1.5 g/t Au cut-off grade, see the technical report entitled “NI 43-101 Technical Report: Pahtavaara Project, Finland” with an effective date of April 16, 2018, prepared by Brian Wolfe, Principal Consultant, International Resource Solutions Pty Ltd., an independent qualified person under National Instrument 43-101 – Standards of Disclosure for Mineral Projects). The Company also holds a 100% interest in two properties in Central Finland - Hirsikangas and Osikonmaki; the Gold Centre property, which consists of mineral claims located in the Balmer Township, Red Lake, Ontario; and the Surf Inlet Property in British Columbia.

Web: http://rupertresources.com/

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Note Regarding Forward Looking Statements

This press release contains statements which, other than statements of historical fact constitute “forward-looking statements” within the meaning of applicable securities laws, including statements with respect to: results of exploration activities, mineral resources. The words “may”, “would”, “could”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect” and similar expressions, as they relate to the Company, are intended to identify such forward-looking statements. Investors are cautioned that forward-looking statements are based on the opinions, assumptions and estimates of management considered reasonable at the date the statements are made, and are inherently subject to a variety of risks and uncertainties and other known and unknown factors that could cause actual events or results to differ materially from those projected in the forward-looking statements. These factors include the general risks of the mining industry, as well as those risk factors discussed or referred to in the Company's annual Management's Discussion and Analysis for the year ended February 28, 2019 available at www.sedar.com. Should one or more of these risks or uncertainties materialize, or should assumptions underlying the forward-looking statements prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although the Company has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. The Company does not intend, and does not assume any obligation, to update these forward-looking statements except as otherwise required by applicable law.

APPENDIX

Table 2. Intercepts from the Heinä South target

Hole ID

 

From

(m)

To

(m)

Interval (m)

Au

(g/t)

Estimated true width (m)

120007

 

45.0

56.2

11.2

2.1

unknown

120007

incl.

55.2

56.2

1.0

9.3

unknown

120007

 

60.0

62.0

2.0

0.9

unknown

120007

 

72.0

73.0

1.0

10.6

unknown

120007

 

84.0

86.0

2.0

10.4

unknown

120007

 

89.0

93.0

4.0

0.7

unknown

120007

 

106.0

107.0

1.0

0.8

unknown

120007

 

124.0

128.0

4.0

1.9

unknown

120007

 

133.0

134.0

1.0

0.8

unknown

120007

 

135.0

136.0

1.0

0.6

unknown

120007

 

139.0

144.0

5.0

0.6

unknown

120007

 

160.0

161.0

1.0

2.9

unknown

120007

 

174.0

175.0

1.0

26.1

unknown

120009

 

50.0

51.0

1.0

11.9

unknown

120009

 

165.0

190.0

25.0

1.0

unknown

120009

incl.

174.0

175.0

1.0

2.1

unknown

120009

incl.

183.0

185.0

2.0

4.1

unknown

120009

incl.

189.0

190.0

1.0

2.4

unknown

120011

 

41.0

48.5

7.5

6.5

unknown

120011

incl.

45.0

46.0

1.0

40.7

unknown

120011

 

81.0

82.0

1.0

0.6

unknown

120014

 

30.0

31.0

1.0

1.8

unknown

120014

 

161.0

162.0

1.0

0.7

unknown

120014

 

178.0

179.0

1.0

0.5

unknown

120025

 

127.0

145.0

18.0

0.6

unknown

120025

incl.

143.0

145.0

2.0

2.0

unknown

120025

 

152.0

154.0

2.0

0.8

unknown

120025

 

160.0

161.0

1.0

0.8

unknown

120026

 

53.0

54.0

1.0

1.4

unknown

120026

 

130.0

131.0

1.0

0.8

unknown

120026

 

138.0

140.0

2.0

1.3

unknown

120026

 

145.0

146.0

1.0

0.7

unknown

120026

 

194.0

195.0

1.0

0.6

unknown

120026

 

204.0

205.0

1.0

0.9

unknown

120026

 

235.0

236.0

1.0

0.5

unknown

120026

 

241.0

242.0

1.0

1.8

unknown

120028

 

64.0

65.0

1.0

0.5

0.9

120028

 

97.0

100.0

3.0

1.2

2.7

120028

 

101.0

102.0

1.0

0.6

0.9

120028

 

183.0

184.0

1.0

1.2

0.9

120029

 

40.0

41.0

1.0

1.6

unknown

120029

 

52.1

53.0

0.9

0.5

unknown

120029

 

95.0

114.0

19.0

1.3

unknown

120029

incl.

95.0

97.0

2.0

4.5

unknown

120029

incl.

112.0

113.0

1.0

4.6

unknown

120029

 

120.0

121.0

1.0

0.8

unknown

120030

 

17.0

18.0

1.0

0.6

unknown

120030

 

22.0

31.0

9.0

0.7

unknown

120030

 

58.0

69.0

11.0

0.9

unknown

120030

incl.

59.0

60.0

1.0

2.8

unknown

120030

incl.

65.0

66.0

1.0

2.7

unknown

120030

 

128.0

129.0

1.0

0.7

unknown

120030

 

133.0

134.0

1.0

0.5

unknown

120030

 

145.0

150.0

5.0

0.6

unknown

120030

 

161.0

162.0

1.0

0.8

unknown

120030

 

209.0

210.0

1.0

0.5

unknown

120030

 

216.0

218.0

2.0

0.7

unknown

120031

 

74.0

75.0

1.0

0.7

0.9

120031

 

83.0

95.0

12.0

2.2

10.8

120031

incl.

87.0

90.0

3.0

6.6

2.7

120032

 

55.0

56.0

1.0

1.1

0.9

120032

 

62.0

63.0

1.0

0.5

0.9

120032

 

76.0

82.0

6.0

1.1

5.4

120033

 

150.0

151.0

1.0

482.0

0.9

120033

 

190.0

192.0

2.0

2.7

1.8

120033

 

194.0

195.0

1.0

0.9

0.9

120033

 

201.0

202.0

1.0

0.5

0.9

120036

 

106.0

107.0

1.0

0.6

unknown

120036

 

159.0

161.0

2.0

0.6

unknown

120036

 

170.0

171.0

1.0

1.9

unknown

120036

 

176.0

183.0

7.0

1.7

unknown

120036

incl.

176.0

177.0

1.0

4.8

unknown

120041

 

87.0

88.0

1.0

0.6

unknown

120043

 

43.0

44.0

1.0

0.6

unknown

120043

 

78.4

82.0

3.6

0.8

3.4

120044

 

13.0

15.0

2.0

2.4

unknown

120044

 

22.0

22.3

0.3

2.4

unknown

120044

 

22.6

23.0

0.4

0.5

unknown

120044

 

31.9

32.2

0.3

0.5

unknown

120044

 

50.0

51.0

1.0

0.8

unknown

120048

 

94.0

95.0

1.0

1.6

0.9

120050

 

207.0

213.0

6.0

1.4

5.5

120050

 

216.0

217.0

1.0

0.7

0.9

120050

 

232.0

233.0

1.0

1.0

1.0

 

 

 

 

 

 

 

Notes to table: Results reported to a lower cut of 0.5g/t Au. No upper cut-off grade was applied. Unless specified, true widths cannot be accurately determined from the information available.

Table 3. Drill collar locations of Heinä South drilling

Hole ID

Easting

Northing

Elevation

Azimuth

Dip

EOH (m)

120007

453179.2

7497525.5

226.5

225.5

-45.3

224.7

120009

453212.0

7497565.8

227.2

228.5

-45.1

191.9

120011

453260.6

7497495.0

226.7

313.3

-45.3

196.8

120014

453325.3

7497134.6

226.7

301.1

-50.9

199.6

120016

453276.7

7497032.9

226.4

39.4

-45.0

199.8

120024

452704.1

7496827.1

227.6

101.5

-50.7

127.6

120025

453057.7

7497404.5

226.5

45.63

-45.3

198.5

120026

452951.3

7497298.3

226.9

43.8

-45.8

255.5

120027

452799.2

7497001.5

227.3

44.7

-45.4

170

120028

453120.7

7497538.1

226.7

161.5

-50.8

201.3

120029

453049.2

7497364.8

226.6

341.9

-50.4

139.2

120030

453049.4

7497364.2

226.6

342.1

-65.4

220.5

120031

453085.0

7497519.0

226.3

160.0

-50.6

127.2

120032

453048.3

7497486.3

226.6

158.9

-50.4

133

120033

452975.5

7497543.5

226.0

160.4

-49.8

204.9

120036

453099.0

7497112.1

225.9

340.0

-50.0

200.1

120041

452960.2

7497426.0

225.8

160.0

-50.0

89.6

120043

453346.4

7497571.3

225.9

160.0

-50.0

149.4

120044

452981.1

7497368.3

226.8

160.0

-50.0

153.8

120046

453160.3

7497545.4

225.8

160.0

-50.0

202.3

120048

453199.0

7497567.9

226.4

160.0

-50.0

143.2

120050

453056.8

7497594.4

227.5

161.8

-50.7

251.2

Notes to table: The coordinates are in ETRS89 Z35 and all holes are surveyed at 3m intervals downhole and all core is orientated. No upper cut-off grade was applied. Unless specified, true widths cannot be accurately determined from the information available.

Share to Youtube Share to Facebook Facebook Share to Linkedin Share to Twitter Twitter Share to Tiktok