Tinka announces new step out holes extend zinc at South Ayawilca by 200 metres and high-grade silver highlights new style of zinc mineralization

 

22.8 METRES GRADING 8.4% ZINC IN HOLE A17-071, MINERALIZATION REMAINS OPEN
11.5 METRES GRADING 780 GRAMS PER TONNE SILVER + 5.2 % ZINC+LEAD IN HOLE A17-072

VANCOUVER, July 17, 2017 /CNW/ - Tinka Resources Limited ("Tinka" or the "Company") (TSXV: TK) (OTCPK: TKRFF) is pleased to announce assay results of five new step-out drill holes at its 100%-owned Ayawilca zinc project in central Peru. Three holes were drilled at the South Ayawilca discovery area, with one hole drilled at West Ayawilca (A17-074). Hole A17-073 was drilled at Zone 3, the first hole into this new target.

Holes A17-071 and A17-075 both intersected significant thicknesses of high grade zinc and have extended the footprint of the South Ayawilca discovery by 200 metres to the southeast, where zinc remains open and untested.Hole A17-072 at South Ayawilca intersected high grade silver with moderate grade zinc-lead mineralization adjacent to an important northeast-trending fault, which is a new style of mineralization observed at Ayawilca, This new high-grade silver discovery opens up additional exploration opportunities.Three rigs continue to turn at the project on multiple fronts.

Key Highlights
Hole A17-071 (South Ayawilca):

• 22.8 metres at 8.4 % zinc, 0.8 % lead, & 35 g/t silver from 327.2 metres depth, including
• 12.6 metres at 11.6 % zinc, 0.9 % lead, & 35 g/t silver from 332.4 metres depth;

Hole A17-072 (South Ayawilca):

• 11.5 metres at 2.9 % zinc, 2.3 % lead & 781 g/t silver from 294.5 metres depth, including
• 2.0 metres at 5.6 % zinc, 5.5 % lead & 3167 g/t silver from 302.0 metres depth;

Hole A17-075 (South Ayawilca):

• 20.8 metres* at 5.0 % zinc, 11 g/t silver & 44 g/t indium from 359.0 metres depth, including
• 3.5 metres at 10.2 % zinc, 17 g/t silver & 96 g/t indium from 376.3 metres depth;

Hole A17-074 (West Ayawilca):

• 2.2 metres at 31.0 % zinc, 0.1 % lead & 138 g/t silver from 71.4 metres depth (vein), and
• 0.7 metres at 18.3 % zinc & 38 g/t silver from 148.0 metres depth (vein);

Hole A17-073 (Zone 3):

The first hole at Zone 3, drilled 700 metres east of the existing East Ayawilca Inferred Resource, was completed to a depth of 710 metres. Replacement sulphide mineralization was encountered, mostly pyrite with minor sphalerite, over a 15-metre interval near the base of the carbonate sequence which hosts mineralization elsewhere.At Ayawilca, pyrite occurs on the margins of the zinc mineralization, so we interpret this as an indication that significant zinc mineralization may be close by.A follow-up hole (A17-081) is in progress, with one more hole planned for Zone 3 in this program.

See drill hole and zinc grade-thickness maps (Figure 1 and Figure 2), and a South Ayawilca cross section (Figure 3).

Dr. Graham Carman, Tinka ?s President and CEO, stated: "We are very pleased with these new drill results. The zinc discovery at South Ayawilca continues to expand southward, and remains open in several directions (see Figure 2). Hole A17-075 indicates that zinc may be thickening to the south on that section. The high-grade silver (zinc-lead) discovery in A17-072 is also exciting as it opens potential for additional bonanza-grade mineralization along the South Ayawilca Fault, which is largely untested. High-grade silver (zinc-lead) mineralization occurs with sulphides as cavity fillings in recrystallized limestone with abundant quartz-carbonate alteration, quite different to the massive sulphide mineralization associated with the high-grade zinc."

Dr. Carman continued: "We are continuing to test zinc targets at the project and expand the drilling effort. Step-out holes are taking place at West and South Ayawilca, with new targets being drilled at Zone 3 and Chaucha. The drilling at Zone 3 is progressing well.Indications are that a significant zinc sulphide system could be nearby. Zone 3 is a large target area covering more than 1 km², and several holes will be needed to evaluate the full potential of that area."

True thicknesses of the zinc intersections are estimated to be at least 85% of the downhole thickness, except where otherwise noted in footnotes to Table 1. All significant results of the 2017 program are summarized in Table 1 with the strongest intercepts in bold text. Table 2 is a summary of all drill collar information to date.

Table 1.Summary of 2017 Drill Results from Ayawilca

Notes on sampling and assaying:

Drill holes are diamond HQ or NQ size core holes with recoveries generally above 80% and often close to 100%.The drill core is marked up, logged, and photographed on site.The cores are cut in half at the Company's core storage facility, with half-cores stored as a future reference.Half-core is bagged on average over 1 to 2 metre composite intervals and sent to either ALS or SGS laboratories in Lima for assay in batches.Standards and blanks are inserted into each batch prior to departure from Tinka's core storage facilities.At the laboratory samples are dried, crushed to 100% passing 2mm, then 500 grams pulverized for multi-element analysis by ICP (MS) using multi-acid digestion. Samples assaying over 1% zinc, lead, or copper are re-assayed using precise ore-grade AAS techniques.

Table 2.Summary of Drill Collar Information

The qualified person, Dr. Graham Carman, Tinka's President and CEO, and a Fellow of the Australasian Institute of Mining and Metallurgy, has reviewed and verified the technical contents of this release.

On behalf of the Board,

"Graham Carman"
Graham Carman, President & CEO

About Tinka Resources Limited
Tinka is an exploration and development company with its flagship property being the 100%-owned Ayawilca carbonate replacement deposit (CRD) in the zinc-lead-silver belt of central Peru, 200 kilometres northeast of Lima. The Ayawilca Zinc Zone has an Inferred Mineral Resource of 18.8 Mt at 5.9 % zinc, 0.2 % lead, 15 g/t silver & 74 g/t indium, and a Tin Zone Inferred Mineral Resource of 5.4 Mt at 0.76 % tin, 0.31 % copper & 18 g/t silver. Both resources are open for expansion (May 25, 2016). The Silver Zone at Colquipucro, 2 km north of the Zinc Zone, has an Indicated Mineral Resource of 2.9 Mt at 112 g/t silver for 10.4 Moz silver and an Inferred Mineral Resource of 2.2 Mt at 105g/t silver for 7.5 Moz silver hosted by oxidized lenses between the surface and 80 metres depth (Feb. 26, 2015).

Forward Looking Statements: Certain information in this news release contains forward-looking statements and forward-looking information within the meaning of applicable securities laws (collectively "forward-looking statements").All statements, other than statements of historical fact are forward-looking statements. Forward-looking statements are based on the beliefs and expectations of Tinka as well as assumptions made by and information currently available to Tinka's management.Such statements reflect the current risks, uncertainties and assumptions related to certain factors including, without limitations, drilling results, the Company's expectations regarding mineral resource calculations, capital and other costs varying significantly from estimates, production rates varying from estimates, changes in world metal markets, changes in equity markets, uncertainties relating to the availability and costs of financing needed in the future, equipment failure, unexpected geological conditions, imprecision in resource estimates or metal recoveries, success of future development initiatives, competition, operating performance, environmental and safety risks, delays in obtaining or failure to obtain necessary permits and approvals from local authorities, community agreements and relations, and other development and operating risks. Should any one or more of these risks or uncertainties materialize, or should any underlying assumptions prove incorrect, actual results may vary materially from those described herein.Although Tinka believes that assumptions inherent in the forward-looking statements are reasonable, forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein. Except as may be required by applicable securities laws, Tinka disclaims any intent or obligation to update any forward-looking statement.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release

SOURCETinka Resources Limited

View original content with multimedia: http://www.newswire.ca/en/releases/archive/July2017/17/c5607.html