Wesdome Announces the Continuation of the Kiena Deep A Zone Down Plunge to 830 Metres Long, Including Drill Results Containing 106.3 g/t Au Over 10.5 Metres, and Drilling up Plunge Commences From the New Exploration Ramp

 

TORONTO, Feb. 19, 2020 (GLOBE NEWSWIRE) -- Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”) today announces additional results from the ongoing underground definition and exploration drilling at its 100% owned Kiena Mine Complex, in Val d'Or, Quebec.

Seven underground drills are now in operation completing the infill and up and down plunge extension drilling of the Kiena Deep A Zone. This drilling has continued to confirm the overall continuity of the geometry and the high grade gold mineralization of the Kiena Deep A Zone and identify additional mineralization outside of the most recent resource estimate. Recent drilling, including Hole 6580 and its associated wedge holes, have extending the gold mineralization of the A Zone an additional 100 metres (“m”) down plunge and now extends a total in excess of 830 m (see Figure 1 and Photographs 1 & 2). A total of 40,850 m in 136 new drill holes have now been drilled since the latest resource estimate, which is expected to be updated later in 2020.

Kiena Deep A Zone – Down Plunge

Highlights of the down plunge drilling are listed below and summarized in Table 1.

• Hole 6580: 114.8 g/t Au over 10.0 m core length (32.8 g/t Au cut, 5.6 m true width)
• Hole 6580W1: 25.3 g/t Au over 17.2 m core length (21.0 g/t Au cut, 11.6 m true width)
• Hole 6580W2: 86.5 g/t Au over 9.7 m core length (31.7 g/t Au cut, 4.2 m true width) 

All assays cut to 90.0 g/t Au. True widths are estimated.

Kiena Deep A Zone – Definition Drilling

Highlights of the definition drilling are listed below and summarized in Table 1.

• Hole 6592: 66.8 g/t Au over 9.2 m core length (16.8 g/t Au cut, 7.0 m true width)
• Hole 6593: 106.3 g/t Au over 10.5 m core length (37.8 g/t Au cut, 8.5 m true width)
• Hole 6606: 30.5 g/t Au over 10.9 m core length (19.0 g/t Au cut, 8.0 m true width)  

All assays cut to 90.0 g/t Au. True widths are estimated.

79 Level Exploration Ramp

The 79 level drift, consisting of 576 m of down ramp development and drill platforms, has now been completed and two drills have been mobilized to commence drilling of the potential up plunge extension of the Kiena Deep A Zone. Previous limited drilling into the up plunge area from 67 level returned a number of good intersections that require follow up. In addition, drilling from this ramp will allow drilling of the down dip extension of the VC zones. Based on recent drilling from 67 Level, it is interpreted that the VC zones are folded as they extend down plunge to connect with the Kiena Deep A Zone (Figure 1 and Photograph 3).

Additionally, a new zone has been discovered on 79 Level between the S50 and VC zones. As the 79 Level exploration ramp was being finalized, there was an opportunity to place the drill part way down the ramp to test the potential extension of the previously mined S50 zone northward towards the VC zones. This area has never been tested and of the 3 holes drilled, one hole intersected two zones of gold mineralization in the footwall mafic volcanics (Figure 2). The drilling intersected quartz ± tourmaline ± fuchsite veins within sheared basalt near the contact with basaltic komatiite and quartz-carbonate stockwork and although not a focus at this time, the intersection does represent additional mineralization for follow up drilling.

Assays from Hole 6627 returned:

• 21.5 g/t Au over 1.1 m (A Zone style of mineralization); and
• 6.7 g/t over 3.0 m (VC Zone style of mineralization).

Mr. Duncan Middlemiss, President and CEO commented, “We are extremely pleased with the recent infill drilling results from the Kiena Deep A Zone that continues to confirm the grade continuity and will be used to convert inferred resources to indicated resources in the updated resource estimate later this year. The PEA study is ongoing and expected to be completed in Q2 2020; which will be based on the latest Kiena Mineral Resource Estimate from September 2019. Ongoing drilling of the A Zone continues to expand the size of this zone and is expected to grow the resource base.”

“We are also pleased with the completion of the 79 Level Ramp. Not only does it provide optimal drill platforms for testing the up plunge extension of the Kiena Deep A Zone, the ramp would also serve as a haulage drift for any future production from this area as it accesses the main shaft level dump pocket. Any additional resources found in this area could greatly enhance the project restart time line and reduce initial capital investment. Although preliminary, we are encouraged to see initial drilling on 79 Level intersected a new zone of gold mineralization in a previously untested area along strike from the S50 Zone. This zone definitely requires follow up drilling but it illustrates the potential of discovering more gold horizons in the immediate area around the Kiena mine with focussed exploration.

“We plan to drill a total of 75,000 m, continue the down ramp development this year in order to enhance our drill platforms probing the lower extents of the A Zone. In addition, metallurgical and environmental detailed studies are continuing; in conjunction with the installation of hydrostatic barriers to secure previously mined out areas of the mine and shaft area; and ongoing ventilation improvements in the preparation for a possible mine restart.”

TECHNICAL DISCLOSURE
The technical and geoscientific content of this release has been compiled, reviewed and approved by Bruno Turcotte, P.Geo., (OGQ #453) Senior Project Geologist of the Company and a "Qualified Person" as defined in National Instrument 43-101 -Standards of Disclosure for Mineral Projects.

Analytical work was performed by ALS Minerals of Val-d’Or (Quebec), a certified commercial laboratory (Accredited Lab #689). Sample preparation was done at ALS Minerals in Val d'Or (Quebec). Assaying was done by fire assay methods with an atomic absorption finish. Any sample assaying >3 g/t Au was rerun with by fire assay method with gravimetric finish, and any sample assaying >10 g/t Au was rerun with the metallic sieve method. In addition to laboratory internal duplicates, standards and blanks, the geology department inserts blind duplicates, standards and blanks into the sample stream at a frequency of one in twenty to monitor quality control.

ABOUT WESDOME
Wesdome Gold Mines has had over 30 years of continuous gold mining operations in Canada. The Company is 100% Canadian focused with a pipeline of projects in various stages of development. The Company’s strategy is to build Canada’s next intermediate gold producer, producing 200,000+ ounces from two mines in Ontario and Quebec. The Eagle River Complex in Wawa, Ontario is currently producing gold from two mines, the Eagle River Underground Mine and the Mishi Open pit, from a central mill. Wesdome is actively exploring its brownfields asset, the Kiena Complex in Val d’Or, Quebec. The Kiena Complex is a fully permitted former mine with a 930-metre shaft and 2,000 tonne-per-day mill. The Company has further upside at its Moss Lake gold deposit, located 100 kilometres west of Thunder Bay, Ontario. The Company has approximately 138.0 million shares issued and outstanding and trades on the Toronto Stock Exchange under the symbol “WDO”.

For further information, please contact:

Duncan Middlemiss	or	Lindsay Carpenter Dunlop
President and CEO		VP Investor Relations
416-360-3743  ext. 2029		416-360-3743  ext. 2025
duncan.middlemiss@wesdome.com		lindsay.dunlop@wesdome.com

220 Bay St, Suite 1200
Toronto, ON, M5J 2W4
Toll Free: 1-866-4-WDO-TSX
Phone: 416-360-3743, Fax: 416-360-7620
Website: www.wesdome.com

This news release contains “forward-looking information” which may include, but is not limited to, statements with respect to the future financial or operating performance of the Company and its projects. Often, but not always, forward-looking statements can be identified by the use of words such as “plans”, “expects”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates”, or “believes” or variations (including negative variations) of such words and phrases, or state that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved. Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Forward-looking statements contained herein are made as of the date of this press release and the Company disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. The Company undertakes no obligation to update forward-looking statements if circumstances, management’s estimates or opinions should change, except as required by securities legislation. Accordingly, the reader is cautioned not to place undue reliance on forward-looking statements. The Company has included in this news release certain non-IFRS performance measures, including, but not limited to, mine operating profit, mining and processing costs and cash costs. Cash costs per ounce reflect actual mine operating costs incurred during the fiscal period divided by the number of ounces produced. These measures are not defined under IFRS and therefore should not be considered in isolation or as an alternative to or more meaningful than, net income (loss) or cash flow from operating activities as determined in accordance with IFRS as an indicator of our financial performance or liquidity. The Company believes that, in addition to conventional measures prepared in accordance with IFRS, certain investors use this information to evaluate the Company's performance and ability to generate cash flow

Table 1: Kiena Complex Drilling Assay and Composite Results

Composites

Hole No.	From (m)	To (m)	Core Length (m)		Estimated True width (m)		Grade (g/t Au)		Cut Grade (90 g/t Au)		Name Zone
6580	725.0	735.0	10.0		5.6		114.84		32.84		A2 Zone
6580W1	290.2	307.4	17.2		11.6		25.29		21.02		A2 Zone
6580W2	332.7	342.4	9.7		4.2		86.45		31.69		A2 Zone
6580W3	413.1	420.5	7.4		2.9		12.59		12.59		A2 Zone
6581*	632.0	639.1	7.1		5.5		26.75		16.14		A2 Zone
6592	239.0	248.2	9.2		7.0		66.79		16.76		A Zone
6593	225.4	235.9	10.5		8.5		106.27		37.75		A Zone
6594	211.6	215.0	3.4		2.7		48.86		31.92		A Zone
6596	240.2	246.0	5.8		5.0		53.00		23.35		A Zone
6597	223.1	229.9	6.8		5.0		17.23		14.59		A Zone
6598	254.0	261.2	7.2		3.2		31.55		18.41		A1 Zone
6601	486.6	490.6	4.0		2.8		60.53		23.78		A2 Zone
6602A	498.6	502.6	4.0		2.0		30.52		26.53		A1 Zone
6604*	491.3	494.9	3.6		3.0		5.04		5.04		A Zone
6604*	497.6	506.0	8.4		7.0		4.99		4.99		A1 Zone
6606	128.9	139.8	10.9		8.0		30.45		18.96		A1 Zone
6606	146.8	150.7	3.9		3.8		7.69		7.69		A2 Zone
6613	119.3	125.3	6.0		3.2		16.63		16.63		A Zone
* Metallic Sieve Analysis Pending

Assays

Hole No.	From (m)	To (m)	Core Length (m)		Grade (g/t Au)		Name Zone
6580	725.0	726.0	1.0		4.00		A2 Zone
6580	726.0	727.0	1.0		0.37		A2 Zone
6580	727	727.9	0.9		81.00		A2 Zone
6580	727.9	728.9	1.0		52.30		A2 Zone
6580	728.9	729.9	1.0		225.00		A2 Zone
6580	729.9	730.9	1.0		775.00		A2 Zone
6580	730.9	731.9	1.0		3.83		A2 Zone
6580	731.9	733.0	1.1		0.68		A2 Zone
6580	733	734	1.0		0.49		A2 Zone
6580	734	735	1.0		13.75		A2 Zone
6580W1	290.2	291.2	1.0		30.90		A2 Zone
6580W1	291.2	292.2	1.0		163.50		A2 Zone
6580W1	292.2	293.2	1.0		21.20		A2 Zone
6580W1	293.2	293.7	0.5		10.05		A2 Zone
6580W1	293.8	294.8	1.0		26.30		A2 Zone
6580W1	294.8	295.8	1.0		25.50		A2 Zone
6580W1	295.8	296.8	1.0		6.74		A2 Zone
6580W1	296.8	297.8	1.0		67.00		A2 Zone
6580W1	297.8	298.4	0.6		2.51		A2 Zone
6580W1	298.4	299.4	1.0		0.17		A2 Zone
6580W1	299.4	300.4	1.0		0.78		A2 Zone
6580W1	300.4	301.4	1.0		8.36		A2 Zone
6580W1	301.4	302.4	1.0		57.50		A2 Zone
6580W1	302.4	303.4	1.0		0.27		A2 Zone
6580W1	303.4	304.6	1.2		0.18		A2 Zone
6580W1	304.6	305.6	1.0		0.15		A2 Zone
6580W1	305.6	306.6	1.0		0.78		A2 Zone
6580W1	306.6	307.4	0.8		24.60		A2 Zone
6580W2	332.7	333.5	0.8		3.24		A2 Zone
6580W2	333.5	334.3	0.8		1.15		A2 Zone
6580W2	334.3	335.3	1.0		4.72		A2 Zone
6580W2	335.3	336.3	1.0		12.40		A2 Zone
6580W2	336.3	337.3	1.0		498.00		A2 Zone
6580W2	337.3	338.3	1.0		145.50		A2 Zone
6580W2	338.3	339.3	1.0		5.20		A2 Zone
6580W2	339.3	340.3	1.0		2.18		A2 Zone
6580W2	340.3	341.3	1.0		0.38		A2 Zone
6580W2	341.3	342.4	1.1		151.50		A2 Zone
6580W3	413.1	414.1	1.0		15.10		A2 Zone
6580W3	414.1	415.2	1.1		2.34		A2 Zone
6580W3	415.2	416.2	1.0		0.29		A2 Zone
6580W3	416.2	417.5	1.3		0.08		A2 Zone
6580W3	417.5	418.5	1.0		36.80		A2 Zone
6580W3	418.5	419.5	1.0		6.50		A2 Zone
6580W3	419.5	420.5	1.0		31.80		A2 Zone
6581	632.0	633.0	1.0		1.08		A2 Zone
6581	633.0	634.0	1.0		1.03		A2 Zone
6581	634.0	635.0	1.0		0.62		A2 Zone
6581	635.0	636.0	1.0		0.14		A2 Zone
6581	636.0	637.0	1.0		0.15		A2 Zone
6581*	637.0	638.0	1.0		12.55		A2 Zone
6581*	638.0	639.1	1.1		158.50		A2 Zone
6592	239.0	240.0	1.0		4.19		A Zone
6592	240.0	241.0	1.0		0.21		A Zone
6592	241	242.3	1.3		444.00		A Zone
6592	242.3	243.3	1.0		0.25		A Zone
6592	243.3	244.0	0.7		0.17		A Zone
6592	244	245	1.0		5.45		A Zone
6592	245.0	246.0	1.0		0.08		A Zone
6592	246.0	246.8	0.8		0.59		A Zone
6592	246.8	247.6	0.8		0.90		A Zone
6592	247.6	248.2	0.6		42.90		A Zone
6593	225.4	226.4	1.0		76.80		A Zone
6593	226.4	227.4	1.0		750.00		A Zone
6593	227.4	228.1	0.7		157.50		A Zone
6593	228.1	229.0	0.9		1.99		A Zone
6593	229.0	230.3	1.3		99.40		A Zone
6593	230.3	231.3	1.0		0.25		A Zone
6593	231.3	232.3	1.0		0.23		A Zone
6593	232.3	233.0	0.7		0.32		A Zone
6593	233	234	1.0		5.42		A Zone
6593	234	234.9	0.9		0.24		A Zone
6593	234.9	235.9	1.0		41.40		A Zone
6594	211.6	212.8	1.2		138.00		A Zone
6594	212.8	214.0	1.2		0.26		A Zone
6594	214	215	1.0		0.20		A Zone
6596	240.2	241.5	1.3		3.91		A Zone
6596	241.5	242.3	0.8		305.00		A Zone
6596	242.3	243.1	0.8		2.18		A Zone
6596	243.1	243.9	0.8		0.18		A Zone
6596	243.9	245.0	1.1		48.10		A Zone
6596	245	245.5	0.5		5.80		A Zone
6596	245.5	246.0	0.5		1.32		A Zone
6597*	223.1	224.1	1.0		108.00		A Zone
6597	224.1	225.1	1.0		0.22		A Zone
6597	225.1	226.1	1.0		0.03		A Zone
6597	226.1	226.6	0.5		1.08		A Zone
6597	226.6	227.6	1.0		0.02		A Zone
6597	227.6	228.9	1.3		0.68		A Zone
6597	228.9	229.9	1.0		7.51		A Zone
6598	254.0	255.2	1.2		1.78		A1 Zone
6598	255.2	256.2	1.0		22.60		A1 Zone
6598	256.2	257.3	1.1		176.00		A1 Zone
6598	257.3	258.4	1.1		3.70		A1 Zone
6598	258.4	259.8	1.4		2.40		A1 Zone
6598	259.8	261.2	1.4		0.97		A1 Zone
6601	486.6	487.6	1.0		237.00		A2 Zone
6601	487.6	488.6	1.0		1.77		A2 Zone
6601	488.6	489.6	1.0		0.58		A2 Zone
6601	489.6	490.6	1.0		2.78		A2 Zone
6602A	498.6	499.7	1.1		104.50		A1 Zone
6602A	499.7	500.7	1.0		4.31		A1 Zone
6602A	500.7	501.8	1.1		1.86		A1 Zone
6602A	501.8	502.6	0.9		1.04		A1 Zone
6604*	491.3	491.9	0.6		12.45		A Zone
6604	491.9	492.9	1.0		6.27		A Zone
6604	492.9	493.9	1.0		2.36		A Zone
6604	493.9	494.9	1.0		2.05		A Zone
6604	497.9	498.9	1.0		3.20		A1 Zone
6604	498.9	499.9	1.0		4.67		A1 Zone
6604	499.9	500.9	1.0		1.29		A1 Zone
6604	500.9	501.9	1.0		4.02		A1 Zone
6604*	501.9	502.9	1.0		16.70		A1 Zone
6604	502.9	503.9	1.0		1.27		A1 Zone
6604	503.9	504.9	1.0		4.82		A1 Zone
6604	504.9	506.0	1.1		4.08		A1 Zone
6606	128.9	130.3	1.4		179.50		A1 Zone
6606	130.3	131.5	1.2		0.10		A1 Zone
6606	131.5	132.7	1.2		0.02		A1 Zone
6606	132.7	133.7	1.0		0.25		A1 Zone
6606	133.7	134.7	1.0		0.03		A1 Zone
6606	134.7	135.7	1.0		0.03		A1 Zone
6606	135.7	136.7	1.0		2.28		A1 Zone
6606	136.7	137.7	1.0		2.05		A1 Zone
6606	137.7	138.7	1.0		3.23		A1 Zone
6606	138.7	139.8	1.1		66.00		A1 Zone
6606	146.8	147.8	1.0		20.30		A2 Zone
6606	147.8	148.7	0.9		0.47		A2 Zone
6606	148.7	149.7	1.0		0.49		A2 Zone
6606	149.7	150.7	1.0		8.77		A2 Zone
6613	486.6	487.6	1.0		9.33		A Zone
6613	487.6	488.6	1.0		67.60		A Zone
6613	488.6	489.6	1.0		19.75		A Zone
6613	489.6	490.6	1.0		5.79		A Zone
6613	489.6	490.6	1.0		0.87		A Zone
6613	489.6	490.6	1.0		11.20		A Zone
* Metallic Sieve Analysis Pending

Photos accompanying this announcement are available at 

https://www.globenewswire.com/NewsRoom/AttachmentNg/abc29ffe-492a-40d4-a502-46b95f7cca03

https://www.globenewswire.com/NewsRoom/AttachmentNg/e5e5bc74-c906-41ae-8b74-efd125039515

https://www.globenewswire.com/NewsRoom/AttachmentNg/2090a538-04c6-4e04-bfa0-778532710b86

https://www.globenewswire.com/NewsRoom/AttachmentNg/833cb418-9226-40eb-b641-ea78e53ceeb5

https://www.globenewswire.com/NewsRoom/AttachmentNg/f83fc5e4-ed09-4542-ab17-b116b6a0cadf

PDF available: http://ml.globenewswire.com/Resource/Download/889c022b-904f-4daf-84f1-6815a4532852