High Grade Assay Results And Continuing Success On The Northwest Athabasca Property, Saskatchewan

TORONTO, Ontario (November 26 2012) - Mega Uranium Ltd. (TSX:MGA) ("Mega") and Forum Uranium Corp. (TSXV:FDC) ("Forum") are pleased to announce assay results from the first drill target at the Northwest Athabasca property under option from Cameco Corporation. Uranium mineralization was encountered at shallow depths in two holes drilled on Zone 2A (see news release dated November 8, 2012).

Drillhole NWA-35 - 2.48% U3O8 over 1.5 metres at a vertical depth of 26 metres with a 0.5 metre interval grading 5.77% U3O8 .

Drillhole NWA-34 - 20 centimetres grading 0.27% U3O8 at a vertical depth of 50 metres, located only 20 metres west of the historic Zone 2A mineralization.

Further drilling is recommended in the Zone 2A area where additional targets have been delineated including an EM conductor 40 metres to the west, along strike from the known mineralization at Zone 2A.

The drill rig is currently investigating the Barney target, a gravity low west, and on strike from, the Maurice Bay deposit. Uranium mineralization within zones of strong basement alteration has been intercepted in several holes. This is the third target that has encountered uranium mineralization on the property. A full description of the results will be released upon completion of drilling at the Barney zone.

The Northwest Athabasca property hosts the Maurice Bay deposit (historical resource* of 1.5 million pounds uranium at a grade of 0.6% U3O8 ). A winter drill program is planned for the first quarter 2013. All targets are similar to Cameco's Millennium deposit and Rio Tinto's Roughrider deposit at much shallower depths (less than 100 metres).

Quality Assurance and Quality Control

Core samples are collected and shipped in sealed containers to the Saskatchewan Research Council, an ISO/IEC 17025:2005 (CAN-P-4E) certified laboratory for geochemical analysis using the Uranium ICP Package. This package is the preferred analytical technique for detecting uranium and pathfinder elements in the alteration halos of unconformity-type uranium deposits in the Athabasca Basin.

Michael Downes Ph.D., P.Geo., Vice President North America and Qualified Person for Mega, has reviewed the technical content of this news release.

Forum and Mega Option with Cameco

Forum and Mega Uranium have entered into a 50/50 Joint Venture Agreement to manage the exploration program during the earn-in period with Forum as initial Operator. Forum and Mega can earn a 60% interest in the Northwest Athabasca project, a joint venture between Cameco Corporation and Areva Resources Canada, by completing $4 million in exploration over four years and making cash payments totaling $400,000 over three years, of which $140,000 has been paid. It is anticipated that Forum and Mega will vest their joint 60% interest in the property upon completion of the current program.

The Northwest Athabasca project will form part of the Mega projects being sold to NexGen Energy Ltd., as announced August 9, 2012 and November 15, 2012. That transaction is expected to close in the fourth quarter of 2012.

Figure 1: Northwest Athabasca Project Gravity Survey. The proposed 2012 fall drill targets on gravity lows (outlined in blue) are circled in black.

*Historical resource for the Maurice Bay deposit, as reported by Saskatchewan Industry and Resources, Miscellaneous Report 2003-7, has not been calculated or classified under the specifications of National Instrument 43-101 and should not be relied upon.

ABOUT MEGA URANIUM

Mega Uranium Ltd. is a Toronto-based mineral resources company with a focus on uranium properties in Australia, Canada and Cameroon. Further information on Mega can be found on the company's website at www.megauranium.com.

For further information, please contact:Investor RelationsMega Uranium Ltd.Richard PatricioEVP Corporate AffairsT: (416) 643-7630info@megauranium.comwww.megauranium.com

Note Regarding Forward-Looking information

Certain information contained in this press release may constitute "forward-looking information", which is information regarding possible events, conditions or results of operations that is based upon assumptions about future economic conditions and courses of action. All information other than matters of historical fact may be forward-looking information. In some cases, forward-looking information can be identified by the use of words such as "seek", "expect", "anticipate", "budget", "plan", "estimate", "continue", "forecast", "intend", "believe", "predict", "potential", "target", "may", "could", "would", "might", "will" and similar words or phrases (including negative variations) suggesting future outcomes or statements regarding an outlook. Forward-looking information in this press release includes, but is not limited to, statements about our plans regarding future acquisitions and property development, our expectations regarding the uranium market, global growth and the use of nuclear power, our drill results, commodity prices and core intersection lengths, in that they constitute estimates, based on certain assumptions of mineralization that may be encountered if a deposit were to be mined.

By its nature, forward-looking information involves known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or industry results, to differ materially from those expressed or implied by such forward-looking information. Some of the risks and other factors that could cause actual results to differ materially from those expressed in the forward-looking information contained in this release include, but are not limited to: risks and uncertainties relating to the interpretation of drill results, the geology, grade and continuity of mineral deposits and conclusions of economic evaluations; results of initial feasibility, pre-feasibility and feasibility studies, and the possibility that future exploration, development or mining results will not be consistent with the Company's expectations; risks relating to possible variations in reserves, grade, planned mining dilution and ore loss, or recovery rates and changes in project parameters as plans continue to be refined; mining and development risks, including risks related to accidents, equipment breakdowns, labour disputes (including work stoppages and strikes) or other unanticipated difficulties with or interruptions in exploration and development; the potential for delays in exploration or development activities or the completion of feasibility studies; risks related to the inherent uncertainty of production and cost estimates and the potential for unexpected costs and expenses; risks related to commodity price and foreign exchange rate fluctuations; the uncertainty of profitability based upon the cyclical nature of the industry in which the Company operates; risks related to failure to obtain adequate financing on a timely basis and on acceptable terms or delays in obtaining governmental approvals or in the completion of development or construction activities; risks related to environmental regulation and liability; political and regulatory risks associated with mining and exploration; and other risks and uncertainties related to the Company's prospects, properties and business strategy.

Although we have attempted to identify important factors that could cause actual results or events to differ materially from those described in the forward-looking information, readers are cautioned that this list is not exhaustive and there may be other factors that we have not identified. Readers are cautioned not to place undue reliance on forward-looking information contained in this release. Forward-looking information is based upon our beliefs, estimates and opinions as at the date of this release, which we believe are reasonable, but no assurance can be given that these will prove to be correct. Furthermore, we undertake no obligation to update or revise forward-looking information if these beliefs, estimates and opinions or other circumstances should change, except as otherwise required by applicable law.

All forward-looking information contained in this release is expressly qualified by this cautionary note.