Mr. Walter Coles reports
SKEENA INTERSECTS 91.56 G/T GOLD OVER 3.82 METRES AT SNIP
Skeena Resources Ltd. has released additional drill results from nine holes at the company's Snip gold project located in the Golden Triangle of British Columbia.
Drilling highlights:
UG17-044: 12.59 grams per tonne gold over 4.70 metres; UG17-053: 58.70 g/t Au over 1.15 metres; UG17-054: 30.40 g/t Au over 1.50 metres; UG17-055: 23.30 g/t Au over 1.50 metres; UG17-062: 91.56 g/t Au over 3.82 metres.
Cross-sections and drill hole data are available on the company's website.
Upper twin zone continues to demonstrate continuity
Targeting a less densely drilled portion of the upper twin zone, 2017 underground drill hole UG17-062 intersected two intervals grading 91.56 g/t Au over3.82 metres and 8.71 g/t Au over 5.00 metres. This hole successfully demonstrates the updip grade and geological continuity of the upper twin. Previously disclosed Skeena drill hole UG17-035 intersected the same style of mineralization again over two intervals grading 19.26 g/t Au over 11.85 metres as well as 11.21 g/t Au over 5.95 metres. Inclusive of historical drilling, this portion of the upper twin has now been traced along its dip extent for 370 metres and remains open for expansion.
In the footwall of the upper twin, drilling has also confirmed and is expanding upon the extensional veining systems that are geologically equivalent to the historically mined 130 and 150 vein systems. Drill hole UG17-044 intersected 12.59 g/t Au over 4.70 metres and the geological continuity is verified by UG17-054 and UG17-055 which graded 30.40 g/t Au over 1.50 metres and 23.30 g/t Au over 1.50 metres, respectively.
Skeena's chief executive officer, Walter Coles, commented: "The latest drill results from Snip speak for themselves. They confirm the high-grade nature of the deposit and the continuity of the veins. We're looking forward to getting back underground in February and commencing a surface exploration drill program in the spring."
Assays are still pending for 12 of the 62 underground drill holes completed in 2017. A phase 2 underground drill program is expected to commence in February with surface drilling planned for summer 2018.
Quality assurance and quality control
A rigorous chain-of-custody and quality assurance/quality control program, consisting of the insertion of certified standard control samples, duplicates and blanks, was applied to the NQ2-diameter, sawn half-core samples. Sample preparation and analyses for 2017 samples were completed at Activation Labs in Kamloops, B.C. Gold is determined by 50-gram fire assay followed by an atomic absorption finish or by gravimetric finish for samples over 10 g/t. Silver and other elements are determined by an ICP analysis following aqua regia digestion. Samples with over 100 g/t silver, 0.5 per cent lead or 1 per cent zinc are reanalyzed by a four-acid digestion followed by ICP-OES.
Qualified person
The scientific and technical information contained in this news release has been reviewed and approved by Skeena's chief geologist, Ron Nichols, PEng, a qualified person as defined by National Instrument 43-101.
About Skeena Resources Ltd.
Skeena Resources is a junior Canadian mining exploration company focused on developing prospective precious metal and base metal properties in the Golden Triangle of northwest British Columbia, Canada. The company's primary activities are the exploration and development of the past-producing Snip gold mine, acquired from Barrick Gold, and the past-producing Porter Idaho silver mine. The company also recently announced preliminary economic assessment results for the Spectrum-GJ copper-gold porphyry project.
SNIP 2017 UNDERGROUND DRILL HOLE ASSAYS HoleFrom To Length AuNo.(m)(m)(m)(g/t)UG17-023 93.0094.50 1.50 2.87UG17-062134.00 139.00 5.00 8.71incl. 137.00 139.00 2.0013.78148.56 152.38 3.8291.56incl. 150.90 152.38 1.48 231.42UG17-053128.00 128.60 0.6042.20133.70 135.20 1.5011.30148.95 150.10 1.1558.70158.00 158.70 0.70 8.82UG17-054 36.5038.00 1.50 8.59111.00 112.50 1.5030.40124.50 125.85 1.35 7.66145.50 149.65 4.15 5.00191.25 192.00 0.7523.50UG17-055 93.2094.70 1.5023.30109.70 110.20 0.5052.00UG17-056160.00 161.00 1.00 4.18178.70 179.50 0.80 5.10UG17-043119.40 119.90 0.5010.30141.00 142.50 1.50 7.21151.85 153.00 1.15 6.45UG17-044114.45 116.10 1.65 6.92125.00 129.70 4.7012.59UG17-045102.50 105.50 3.00 5.90108.50 111.00 2.50 6.25112.50 114.80 2.30 5.21119.55 121.00 1.45 4.54NotesAll values are uncut. Drill intercepts are core length as there are insufficient data available to present true widths.
We seek Safe Harbor.
© 2018 Canjex Publishing Ltd. All rights reserved.